Bedienungsanleitung Midland G12 (Seite 22 von 32) (Englisch)

543256

Zoom out

Zoom in

Vorherige Seite

1/32

Nächste Seite

English

6.4 Vibration alert

Withreferencetopar.5.11,youcansetyourdevicetovibratefor

abouttwosecondswheneveritreceivesacallingtone(CALL)from

other MIDLAND G12 instead of sounding the received melody. To set

thesilentmodedothefollowing:

1) Press seven times the

MENU button. The display shows VIb

(vibration) followed by

oF (vibration disabled) or On (vibration

enabled)ashingtogetherwiththe

icon.

2) Pressthe

+ or – button until you have made your selection

3) Pressthe

PTTbuttontoexit,orwaitforafewseconds.Thedevice

will go back to standby mode storing the new value set.

When vibration alert is enabled the display shows it by this

icon.

Moreover,whenever youswitch onyour transceiver it will vibrate

brieytoremindyou.

2 Vibrating alert used frequently increases battery consumption.

6.5 Dual Watch

The Dual Watch function simulates simultaneous listening of two

channels of your choice by scanning them rapidly. To set dual watch

dothefollowing:

1) Firstselectachannelofyourchoice.

2) Pressseventimesthe

MENU button. The display shows dual

watch followed by

oF(dualwatchdisabled)orOn (dual watch

enabled).

3) Press the

+ or – button until you have selected the second

channel to insert into dual watch.

4) Press the

PTT button to enable dual watch on the channels

selected on step 1 and 3.

During dual watch the display shows the

 icon ashing.As for

scanning,ifyouansweracallwithdualwatchenabled,

MIDLAND

G12pausesdualwatchforamaximumofvesecondsafteryouhave

nishedtransmittingtogiveyouthechancetohearintheeventofa

reply from the other party before restarting dual watch automatically.

To disable dual watch press the

SCAN/MON button. The icon

will disappear from the display and the transceiver will go back in

standby mode on the channel which had been selected at step 1.

6.6 Transmission lock when channel is busy

Before transmitting (by pressing the PTT or CALL/LOCKbutton)it

is advisable to make sure the channel is not busy. If you attempt

to transmit on a busy channel you cannot be heard and you could

create radio interference. MIDLAND G12 can be set to prevent you

transmittingonabusychannelbydoingthefollowing:

1) Pressninetimesthe

MENU button. The display shows bLo (Busy

LockOut)followedby

n (disabled)or Y(enabled)ashing.

2) Pressbuttons

+ or – until you have selected the desired setting.

3) Pressthe

PTTbuttontoexit,orwaitforafewseconds.Thedevice

goes in standby mode storing the new settings.

Ifthechannelisbusy,pressing

PTT or CALL/LOCK buttons when this

function is enabled will only produce an error beep. As soon as the

channel is free the

PTT and CALL/LOCK buttons are automatically

enabled for their normal functioning.

2 This function is particularly useful when MIDLAND G12 is

operated by an inexperienced user.

6.7 Compander

The Compander (CompressorExpander) improves audio quality

by compressing your voice and expanding that of the other party

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Midland G12 Seite 22

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info