28
GB
Database Setup
Indication of information concerning the internal
hard disks and activation, deactivation and for-
matting of the hard disks
Configuration
Export or import of all settings of the recorder,
reset to factory settings
Shutdown
Shutdown of the system (to switch off) or restart
of the system
6.2 Basic settings
6.2.1 Changing the menu language
The preset language for the settings and dialogues
in the OSD menu is English. This instruction manual
refers to this language. To change the language:
1) As described in chapter 6.1, activate the main
menu (fig. 14) and then the submenu System
Setup (fig. 15).
2) Select the desired menu language in the line
2.Language.
6.2.2 Key beep and audio output
To deactivate the beep whenever a button is
pressed:
1) Via the main menu (fig. 14), activate the submenu
System Setup (fig. 15).
2) Via the line 8.Audio Output/Key Beep,
activate the corresponding submenu (fig. 16).
3) In the line 2.Key Beep, define if a beep will
sound whenever a button is pressed (ON) or not
(OFF).
To define the audio signal at the audio output AUDIO
OUT or MAIN AUDIO (27):
4) In the line 1.Audio Output, select live sound
only (Always Live), change-over to the sound
of the recording while replaying (Live/PB) or no
sound (OFF).
6.2.3 Monitor settings
To set the main monitor:
1) Via the main menu (fig. 17), activate the submenu
Monitor Setup (fig. 18).
2) In the line 3.VGA Resolution, select the
desired resolution for the VGA output (pixels hor-
izontal × vertical).
Note: If you select a higher resolution than the
monitor will be able to display, “No Signal” will
appear on the screen. In this case, press the but-
ton ESC (7) to keep the previous setting.
3) To centre the image on the monitor, use the func-
tion 2.Screen Center Adjust. Move the
image with the buttons , , and (8) in
such a way that it will be displayed in the centre
of the monitor.
If a mouse has been connected, click the
cross inserted in the centre to move the image.
Move the mouse to position the image in the cen-
tre. To store this setting, press the left mouse but-
ton.
4) To set the colours of a monitor, insert a test pat-
tern of vertical colour bars via the function
4.Show Color Bar. To return to the menu,
press the button ENTER (6) or ESC (7) or a
mouse button.
5) In the line 1. Show Camera Title, it will also
be possible to define if the camera titles will be
displayed on the monitor (Yes) or not (No)
[
chapter 6.2.4]
6.2.4 Camera titles
For each camera channel, it will be possible to insert
a title of up to 11 characters in the image. To assign
titles to the cameras:
1) Via the main menu (fig. 19), activate the submenu
Camera Setup (fig. 20).
⑲
Main menu: “Camera Setup” selected
⑱
Submenu “Monitor Setup”
⑰
Main menu: “Monitor Setup” selected
⑯
Submenu “Audio Output / Key Beep”
⑮
Submenu “System Setup”
⑭
Main menu: “System Setup” selected
MENU
┣ System Setup
┃┣1.System/Version Info
┃┣2.Language
┃┣3.Date/Time
┃┣4.Unit Name
┃┣5.User Management
┃┣6.Network Setup
┃┣7.RS485 Setup
┃┗8.Audio Output/Key Beep
┣ Monitor Setup
┃┣1.Show Camera Title
┃┣2.Screen Center Adjust
┃┣3.VGA Resolution
┃┗4.Show Color Bar
┣ Camera Setup
┃┣1.Analog Camera Select
┃┣2.Dome Protocol
┃┣3.Dome ID
┃┣4.Camera Title
┃┣5.Covert
┃┣6.Brightness
┃┣7.Contrast
┃┣8.Saturation
┃┗9.Hue
┣ Record Setup
┃┣1.Record Mode Setup
┃┣2.Schedule Setup
┃┣3.Preset Config
┃┣4.Per Camera Config
┃┣5.ezRecord Setup
┃┣6.Data Lifetime
┃┣7.Circular Recording
┃┣8.Audio Recording
┃┗9.Purge Data
┣ Sequence Setup
┃┣1.Main Monitor Dwell
┃┣2.Main Monitor Schedule
┃┣3.Call Monitor Dwell
┃┗4.Call Monitor Schedule
┣ Event Setup
┃┣1.Internal Buzzer
┃┣2.Event Icon
┃┣3.Email Notice
┃┣4.Email Attachment
┃┣5.Event Full Screen
┃┣6.Event Duration
┃┗7.Per Channel Config
┣ Database Setup
┃┣1.Total Size
┃┣2.Free Size
┃┣3.Avail.Rec Time
┃┗4.Internal Disks
┣ Configuration
┃┣1.Load Factory Default
┃┣2.Import Config
┃┗3.Export Config
┗ Shutdown
┣ 1.Power Off
┗ 2.Reboot
⑬
Menu structure
