R331 Rechargeable Remote Control
5. How to use the Find Feature
STEP 1. If you have misplaced the remote control, simply press the button labeled FIND
on the Base Station. The remote will sound and flash to make it easy to find your
misplaced remote control.
STEP 2. Once you have located the remote control, press any key on the remote to stop
the sound and flashing keys.
6. Manual Programming
Use the following steps to setup the TV, DVD or AUX mode keys:
1. Power on the device you want to program and locate the 4-digit code from the code list.
2. Press and hold the mode key (TV, DVD, or AUX) and while holding it pressed, press the
OK key for one second.
3. Release both keys, all of the mode keys will flash then the selected mode key light will
stay lit.
4. Enter the 4-digit code by pressing the numerical keys (0-9). The selected mode key light
will blink for each digit entry and will remain off after the entry of the fourth digit - indicating
a successful setup.
5. Point the remote control at the selected device and press the power key once. The
device should turn off. If the device stayed on, repeat the steps 2 thru 5 trying each code
for your brand until you find the correct code.
Repeat above steps to setup another device. To use the remote control for your Set-top,
press the STB mode key.
NOTE: If an invalid code is entered or no key is pressed at all for 30 seconds, the mode
key light flashes for 3 seconds and turns off. The remote control returns to normal
operation and you will need to start over from step A2 to setup the device.
7. Using the Search Function
To search for a particular device code for DVD or AUX e.g. VCR, use the Manual Programming
for section A and program DVD or AUX with any VCR code prior to starting a search.
1. Turn on the device you want to control and point the remote at that device.
2. Press and hold the mode key (TV, DVD, or AUX) and while holding it pressed, press the
OK key for one second.
3. Release both keys, all of the mode keys will flash then the selected mode key light will
stay lit.
4. Press the power button repetitively until the selected device turns off. Once your device
has turned off, press OK to save the code.
5. To indicate a successful setup, the selected mode key will turn off and you are ready to
setup another device by following steps 1 thru 4 of this section.
