R331 Rechargeable Remote Control
10. Volume Control Setup Options
The volume controls will control your Set-top until the TV device mode is programmed, e.g. if DVD
mode is selected then volume controls your Set-top.. If TV mode is programmed and DVD mode
is selected, then volume controls your TV. If you'd like the volume commands to operate from just
one device, e.g. always TV, then follow the instructions in Section E-I. If you'd like the volume
commands to be sent to different devices depending which mode you are in, then follow the
instructions in Section E-II.
A. Volume Always Controls the Same Device
1. Press the TV key and while holding it pressed, press the OK key for 1 second.
2. Release both keys, all of the mode keys will flash followed by the TV mode key light
remaining on.
3. Press and hold the MUTE key for 3 seconds until the TV mode key light briefly turns off
then remains on. Press and release the mode key that you always want to operate the
volume commands (STB, TV, DVD, and AUX). The selected mode key light will remain on.
4. Press and release the MUTE key to save the setting. The selected mode key light will
turn off indicating a successful setup. The volume commands will be setup for the selected
device despite what mode is selected. If the selected mode key light flashes for 3 seconds
and turns off, then the selected mode will have no volume commands of its own and will
need to start over from step 1 above and select a different mode to program the device.
B. Volume Control Depends on Device Selected
1. Press and hold the TV key and while holding it pressed, press the OK key for one
second.
2. Release both keys, all of the mode keys will flash followed by the TV mode key light
remaining on.
3. Press and hold the MUTE key for 3 seconds until the TV mode key light briefly turns off
then stays on, then release the MUTE key.
4. Press and release the MUTE key to save the setting. The TV mode key light turns off
indicating successful setup. The volume commands will now work for different devices.
NOTE: If a programmed mode key has no volume commands of its own, then the volume
control will normally operate the TV. If an invalid key is pressed, the selected mode key
light flashes for 3 seconds and turns off. The remote control returns to normal operation
and you will need to start over. If no key is pressed within 30 seconds, the remote control
times out, the selected mode key light flashes for 3 seconds and turns off. The remote
control returns to normal operation at which time you can start over.
