Bedienungsanleitung Mountfield EL 420 Li 48L (Seite 32 von 42) (Englisch, Italienisch)

765495

Zoom out

Zoom in

Vorherige Seite

1/42

Nächste Seite

EN - 5

Stop.

6. USING THE MACHINE

The safety regulations to follow are described in

chap. 2. Strictly comply with these instructions to avoid

serious risks or dangers.

6.1 PRELIMINARY PROCEDURES (Fig.16)

Make sure the safety key is not inserted in its housing.

Do this when the blade is stationary.

6.1.1 Checking the battery (Fig.17)

6.1.2 Preparing the machine before starting work

NOTE This machine can be used to mow lawns in a

number of dierent ways; before starting work, prepare

the machine based on how the lawn is to be mowed.

a. Preparation for grass cutting and

collection in the grass catcher (Fig.18)

b. Preparation for mowing and grass rear

discharge onto the ground: )

c. Preparation for mowing and mulching (Fig.20)

6.1.3 Cutting height adjustment (Fig.21)

6.1.4 Handle inclination adjustment Fig.8, Fig.12)

6.2 SAFETY CHECKS

Always carry out the safety checks before use.

6.2.1 General safety check

Object Result

Grips Clean, dry.

Handle 

Blade Clean, not damaged or

worn, well sharpened.

Rear discharge guard;

grass catcher

Good condition. No

damage. Properly installed.

Replace if damaged.

Control lever The lever must move

freely, it must not need

forcing and should

return automatically

and rapidly back to

the neutral position.

Battery No damage to the casing,

no liquid leakage.

Screws/nuts on the

machine and on the blade

Correctly tightened

(not loose). Not

damaged or worn.

Machine No signs of damage

or wear. No abnormal

vibrations. No

abnormal sound.

Action Result

1. Start the machine (par.

6.3).

2. Release the switch



1. The blade should

move.

2. The lever should

automatically and

quickly return to

neutral position, the

engine must switch



must stop within

a few seconds.

If any of the results fail to match the indications

provided in the tables, do not use the machine! Contact

a service centre to have it checked and repaired if

necessary.

6.3  (Fig.23÷25)

Ignition of the motor simultaneously engages the

blade.

6.4 OPERATION (Fig.26)

IMPORTANT If the motor stops because

it is overheated whilst mowing, you must wait

approximately 5 minutes before restarting it.

6.4.1 Grass cutting (Fig.27, Fig.28)

NOTE Regulate the forward speed and the

cutting height considering the conditions of the

lawn (the height, density and dampness of the

grass) and the amount of grass collected.

6.4.2 Emptying the grass catcher 

6.5 STOP 

The blade will continue to rotate for a few seconds

after disengagement or after you have switched o the

motor.

IMPORTANT

Always stop the machine:

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Mountfield EL 420 Li 48L Seite 32

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info