Bedienungsanleitung Mountfield EL 420 Li 48L (Seite 31 von 42) (Englisch, Italienisch)

765495

Zoom out

Zoom in

Vorherige Seite

1/42

Nächste Seite



J. Battery (if it is not supplied with the machine,

see chapter 13 “attachments on request”):

provides the energy for starting the motor.





K. Battery charger (if it is not supplied with the

machine, see chapter 13 “attachments on

request”): device used to recharge the battery.

3.3 IDENTIFICATION LABEL (Fig. 1)

1. Sound power level.

2. CE conformity marking.

3. Year of manufacture.

4. Type of machine.

5. Serial number.

6. Name and address of Manufacturer.

7. Article code.

8. Max. motor operation speed.

9. Weight in kg.

10. Power voltage and frequency.

11. Electrical protection rating.

12. Nominal power.

IMPORTANT Quote the information on

the product identication label whenever you

contact an authorised service workshop.

IMPORTANT The example of the Declaration of

Conformity is provided on the last pages of the manual.

3.4 SAFETY SIGNS (Fig. 2).

The machine has various symbols on it.

Meaning of symbols:

Warning. Read the instructions

before operating the machine.

Danger! Risk of thrown objects.

Keep all persons away from the

work area whilst working.

Be careful when using the sharp

blade. Do not put hands or feet near

or under the opening of the blade.

The blade continues to turn even



Remove the safety key (deactivation

device) before doing maintenance.

Do not expose the machine

to rain or humidity.

Be careful when using the sharp blade:

The blade continues to turn even after



Only for electric lawnmowers

IMPORTANT Any damaged or illegible

decals must be replaced. Order replacement

decals from an authorised service centre.

4. ASSEMBLY

The safety regulations to follow are described in

chap. 2. Strictly comply with these indications to avoid

serious risks or dangers.

For storage and transport purposes, some components of

the machine are not installed in the factory and have to be

assembled after unpacking. Follow the instructions below.

Unpacking and completing the assembly should

be done on a at and stable surface, with enough

space for moving the machine and its packaging,

always making use of suitable equipment. Do not use

the machine until all the indications provided in the

“ASSEMBLY” section have been carried out.

Before assembling, make sure the safety key is

not inserted in its housing.

4.1 UNPACKING (Fig.3)

4.2 GRASS CATCHER ASSEMBLY , Fig. 5)

4.3 HANDLE ASSEMBLY

• EL 340 Li 48L - (Fig.6÷

• EL 380/420 Li 48L (Fig.10÷13)

5. CONTROLS

5.1 



enables / disables the machine’s electric circuit.

Removing the key, the electric circuit is completely

deactivated to prevent uncontrolled use of the machine.

IMPORTANT Remove the safety key whenever

the machine is unused or left unattended.

5.2 HANDLE

5.2.1 Control lever

The control lever (Fig.15.A, Fig.15.A.1) starts/stops the

motor and simultaneously engages/disengages the blade.

The positions indicated correspond to:

Start.

Blade engagement.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Mountfield EL 420 Li 48L Seite 31

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info