Bedienungsanleitung Mountfield EL 420 Li 48L (Seite 30 von 42) (Englisch, Italienisch)

765495

Zoom out

Zoom in

Vorherige Seite

1/42

Nächste Seite

EN - 3

• When transporting accumulators, make sure the

contacts never come into contact with each other

and never use metal containers to transport them.

2.6 ENVIRONMENTAL PROTECTION

• Scrupulously comply with local regulations for the

disposal of packaging, deteriorated parts or any

elements with a strong environmental impact; this

waste must not be disposed of as normal waste,



disposal centres where the material will be recycled.

• Scrupulously comply with local regulations

for the disposal of waste materials.

• When the machine is withdrawn from service,

do not dispose of it in the environment, but take

it to a waste disposal facility in accordance

with the local regulations in force.

Do not throw electrical equipment away with

domestic waste. According to the European



equipment waste and its implementation

in compliance with national standards, old

electrical equipment must be collected separately, for

eco-compatible recycling. If electrical equipment is



can leak into the groundwater and contaminate the food

chain, damaging your health and well-being. For further

information on the disposal of this product, contact

your dealer or a domestic waste collection service.

At the end of their working life, dispose

of batteries paying due attention to

the environment. Batteries contain



you and the environment. They must

be removed and disposed of separately at a

facility that accepts lithium-ion batteries.

Separate waste collection of the products

and packaging used allows the materials to

be recycled and reused. Reuse of recycled

materials help to prevent environmental pollution

and reduces the demand for raw materials.

3. GETTING TO KNOW THE MACHINE

3.1 DESCRIPTION OF THE MACHINE

AND PLANNED USE

This machine is a pedestrian controlled lawnmower.

The machine is essentially composed of a motor

which drives a blade enclosed in a casing,

equipped with wheels and a handle.

The operator is able to operate the machine and

use the main controls, always staying behind the

handle at a safe distance from the rotating blade.

If the operator leaves the machine, the motor

and blade will stop within a few seconds.

3.1.1 Intended use

This machine was designed and manufactured

for cutting grass in gardens and grassy areas,

carried out by a pedestrian operator.

Generally speaking this machine can:

1. Mow the grass and collect it in the grass catcher.

2. Mow the grass and discharge it on the

ground from the rear section.

3. Mow, cut and deposit the grass on the



The use of special attachments provided for by the

Manufacturer as original equipment or which may be

purchased separately, allows this work to be done in

various operating modes, illustrated in this manual or the

instructions that accompany the single attachments.

3.1.2 Improper use

Any other usage not in keeping with the afore-

mentioned ones may be hazardous and

harm persons and/or damage things.

Examples of improper use may

include, but are not limited to:

– Allowing children, animals or other

passengers to ride on the machine as



compromise safe driving by the operator.

– Letting oneself be transported by the machine.

– Using the machine to tow or push loads.

– Using the blade on surfaces other than grass.

– Using of the machine for leaf or debris collection.

– Using the machine to trim hedges, or for

cutting vegetation other than grass.

– Use of the machine by more than one person.

IMPORTANT Improper use of the machine will

invalidate the warranty, relieve the Manufacturer from

all liabilities, and the user will consequently be liable

for all and any damage or injury to himself or others.

3.1.3 User types

This machine is intended for use by consumers,

i.e. non-professional operators.

It is intended for “DIY” use only..

IMPORTANT The machine must

be used by one operator.

3.2 MAIN COMPONENTS Fig

A. Chassis: this is the casing that

houses the rotating blade.

B. Motor: the driving force for the blade.

C. Cutting means (blade): the element

designed to cut the grass.

D. Rear discharge guard: it is a safety device



from being hurled away from the machine.

E. Grass catcher: as well as collecting the

grass cuttings, this is also a safety element



from being hurled away from the machine.

F. Handle: this is the operator’s work station. It is

long enough to ensure the operator remains at a

safe distance from the rotary blade whilst working.

G. Control lever: starts/stops the motor and

simultaneously engages/disengages the blade.

H. Hatch for accessing the battery compartment

I. Safety key (Deactivation device): The key

enables / disables the machine’s electric circuit.

Mountfield EL 420 Li 48L Seite 30

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info