Bedienungsanleitung MTD Zero Turn Serie Frontcut (Seite 8 von 18) (Englisch)

495078

Zoom out

Zoom in

Vorherige Seite

1/18

Nächste Seite

Operating Instructions English

Check the area in which you intend

to use the unit and remove all

objects that could be hit and

propelled by the unit. You can thus

avoid injuries and damage to the

unit.

Never mow on slopes that are

steeper than 12° (20 %). Working on

slopes is dangerous; the risk of

rollover and sliding is increased.

When working on slopes, always

drive off and halt the unit gently and

gradually. The transmission should

always be engaged when driving

down a slope – never coast – and

drive at a low speed. Never drive

across the face of a slope, always

up and down the slope.

Only use the unit in daylight or with

a sufficient level of artificial lighting.

The unit is not authorised for the

transport of people. Never allow

passengers on the unit.

Before any work on the

appliance

Protect yourself from injury. Before

doing any work to this appliance:

– turn the engine off,

– remove the ignition key,

– lock the parking brake,

– wait until all moving parts have

come to rest and the engine has

fully cooled,

– pull off the cap of the spark plug,

so that the engine cannot

inadvertently start.

After working with the

appliance

Only leave the appliance once you

have turned off the engine, actuated

the parking brake and have removed

the ignition key.

Safety features

Safety features serve to protect you

and must always be functional.

You may not make any alterations

to the safety features or circumvent

their proper functioning.

Safety features are:

Grass flap

Fig. 2

The grass flap protects you against

possible injuries resulting from the

cutting blade or objects that are

propelled by it. The unit may only

be operated with the grass flap

attached.

Safety lock system

With the safety lock feature,

the engine can only be started if

– he driver is sitting on the driver

seat,

– the brake pedal is fully depressed,

and/or the parking brake is

engaged,

– the engage switch (PTO) is

switched off.

The safety lock feature switches off

the engine automatically as soon as

the driver leaves the driver seat

without engaging the parking brake

and/or without having switched off

the engage switch (PTO).

The safety interlock system

automatically switches off the clutch

switch (PTO) as soon as the reverse

pedal is depressed (provided the

OCR function has not been

activated). To turn on the engage

switch (PTO) again, you must first

switch it off and then switch it on

again.

The safety interlock system auto-

matically switches the engine off as

soon as the transport position pedal

is pressed when driving downhill on

a gradient greater than 10° (17 %).

Symbols on the appliance

Various symbols are stuck to the

appliance in the form of adhesive

labels. The following provides an

explanation of the symbols.

Warning! Read the

operating instructions

before starting up.

Keep third parties

away from the danger

area!

Risk of injury from

rotating blades and

other rotating parts.

Always remove the

spark plug connector

before working on the

cutters! Keep fingers

and feet well away

from the cutters!

Always switch off the

appliance and remove

the spark plug con-

nector before adjus-

ting, cleaning or

checking it.

Risk of injury from

propelled grass or

solid objects that are

propelled.

There must be no

persons, especially

children, or animals in

the area of operation.

Working on steep

slopes increases

danger.

Warning!

Risk of explosion.

Battery acid/

Risk of injury.

Withdraw the key from

the ignition before all

work on the unit and

observe the instruc-

tions in this document.

Keep these symbols visible on the

appliance.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

MTD Zero Turn Serie Frontcut Seite 8

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von MTD Zero Turn Serie Frontcut

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info