Bedienungsanleitung Multiplex ROYALevo12 (Seite 35 von 57) (Englisch)

30266

Zoom out

Zoom in

Vorherige Seite

1/57

Nächste Seite

ROYAL evo

Page 90

™-

„Symmetrical with dead zone“

Neutral position of control: Centre

two parameters: Dead zone and travel

100%

-100%

100%

Control

travel

Servo travel

TrvTrv

DeadDead

The option single sided/linear with offset is the only one

where the servo movement starts from the point de-

fined by the OFFSET parameter and not from the centre.

›+

„Single-sided, linear with offset“

Neutral position of control: End-point

two parameters: Offset and travel

100%

-100%

100%

Servo travel

Control

travel

OffsOffs

TrvTrv

Offs = 0%

Offs = -50%

13.3. Sub-menu “Assignment”

The ROYALevo enables the user to assign the various

physical elements present (sticks, sliders, switches, but-

tons) as transmitter controls or switches (function swit-

ches)..

What are transmitter controls?

Transmitter controls are all those elements on your

transmitter which you can use to control a servo (speed

controller, etc.) on the model directly. In chapter 13.3.4.

you find a list of all possible controls for the ROYALevo.

What are switches?

What we term switches are physical controls which are

not used to control primary functions on the model.

They are used, for example, to switch mixer functions

(e.g. Combi-Switch), Dual Rates, timers and flight phases

on and off. In chapter 13.3.5. you find a list of all possi-

ble switches.

' TIP:

For modellers familiar with the MULTIPLEX PROFI mc

3000 and 4000:

All the control elements of the ROYALevo are perma-

nently installed. The ROYALevo does not differentiate

“electrically” between transmitter controls and switches;

this means that any control element can be used as a

transmitter control and/or as a switch. It is no longer

necessary to assign what are known as “transmitter

control switches” or “Gx switches”. For example, if you

wish to time the motor run, simply assign the throttle

transmitter control as the timer switch.

All the control elements of the ROYALevo are perma-

nently installed. The ROYALevo does not differentiate

“electrically” between transmitter controls and switches;

this means that any control element can be used as a

transmitter control and/or as a switch. It is no longer

necessary to assign what are known as “transmitter

control switches” or “Gx switches”. For example, if you

wish to time the motor run, simply assign the throttle

transmitter control as the timer switch.

! Note: Predefined assignment lists

3 of the 5 assignment lists contain default assignment

data. This can be changed at any time to suit your own

requirements. However, please note that we cannot

guarantee that the template will work 100% correctly if

you change the standard mixers and subsequently cre-

ate a new model using a model template (è12.1.)

which includes the assigned “standard mixers”.

The offset moves the

end-pont of the servo

travel. Total travel of the

servo is Offs+Trv

Application sample:

Input Spoiler in the

mixer FLAP+ for large

travel down-wards with

butterfly (crow).

The control generates a

symmetrical movement

of the servo starting at a

point remote from the

control centre (dead

zone), with variable but

identical travel in both

directions.

Attention: Do not use

for AILERON inputs!

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Multiplex ROYALevo12 Seite 35

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Multiplex ROYALevo12

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info