Bedienungsanleitung Multiplex ROYALevo12 (Seite 56 von 57) (Englisch)

30266

Zoom out

Zoom in

Vorherige Seite

1/57

Nächste Seite

Instructions

Page 111

19.4. Using MULTInaut IV

Models equipped with the MULTInaut IV receiver unit

can be operated with the ROYALevo.

The buttons of the ROYALevo are used to control the

MULTInaut functions. No additional switches are re-

quired. All you need are the receiver units in the model.

4 buttons in two groups are assigned to each MUL-

TInaut channel and control the connect lamps, servos,

etc.

The effect of a key-press depends from the selected

operating mode. The following possibilities exist:

1. Left-hand sketch for Servo 5 = M.naut 1

Switching loads (e.g. lamps, horns, ...)

Each key-press changes (toggles) the status of the

load. (OFF à ON resp. ON àOFF)

2. Right-hand sketch Servo 6 = M.naut 2

a. Move servos between two positions

(e.g. undercarriage, tow hook release, ...)

Each key-press moves the servo (A or B) from one

position to the other.

(right à left resp. left à right)

b. Move the servo continuously (quasi-

proportional)

(e.g. mixture)

As long as the key is pressed the servo (C) moves

into one direction until it reaches its end-point.

The full travel is split in 32 steps and takes approx.

4 sec.. A short hit on the key initiates a step of

approx. 3°.

This is how to activate MULTInaut

1. Assign M.naut 1 or 2 to the receiver output where

the decoder unit is connected to.

2. Back to one of the four status displays press the

ENTER button for more than 3 sec. to activate the

button groups for MULTInaut operation.

Message in the display:

MUTLINAUT keyboard active

3. Press the ENTER button for more than 3 sec. again

to end the MULTInaut operating mode.

19.5. Diagnosis lead

You can connect the transmitter to the receiver directly

using a diagnosis lead, in which case the transmitter

does not generate an RF signal. This can be very useful

for making adjustments, checking travels etc.

This is the procedure:

1. Connect the appropriate diagnosis lead to the

multi-function socket on the back of the transmit-

ter, and to the model’s receiving system

2. First switch the transmitter on (RF remains off)

3. Switch the receiving system on

Different diagnosis leads must be used according to the

receiving system in the model:

Diagnosis lead

for MULTIPLEX switch leads with charge socket # 8 5105

for the „EinStein“ # 8 5162

19.6. PC interface

The multi-function socket on the back panel of the

ROYALevo provides the functions Charge, Teacher/Pupil

(Trainer) and diagnosis mode, and also works as a serial

interface for connection to a PC. Two functions are pos-

sible via this interface:

• Access to transmitter data

• Use of transmitter to control model flying simula-

tors

19.6.1. Accessing transmitter data

Data exchange between transmitter and PC offers the

following possibilities:

• Back-up model memory data on the PC

• Load new software into the transmitter

The latter point provides a unique feature: in conjunc-

tion with the Internet this opens up entirely new meth-

ods of updating the transmitter software, or download-

ing new screen languages.

The software (# 85 5321) and the matching connecting

lead (# 8 5157) required for these functions are available

as optional accessories.

19.6.2. Flight simulator operation

Many manufacturers of flight simulators offer interface

cables with which MULTIPLEX transmitters can be con-

nected directly to the PC. The MULTIPLEX interface ca-

ble is not designed for use with simulators.

If you have queries regarding this application, please

contact the manufacturer of the simulator.

1 a

1 b

2 a

2 b

GND

Button group for

M.naut 1

Button group for

M.naut 2

Servo 5 = M.naut 1

Servo 6 = M.naut 2

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Multiplex ROYALevo12 Seite 56

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Multiplex ROYALevo12

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info