Bedienungsanleitung Multiplex ROYALevo7 (Seite 52 von 77) (Englisch)

30268

Zoom out

Zoom in

Vorherige Seite

1/77

Nächste Seite

ROYAL evo 7 - Instructions

Page 51

ENGLIS

The active flight phase is marked x. Only the active

flight phase can be copied. The following steps are nec-

essary:

1. Select the active phase (

x ) using the UP / DOWN

buttons (▲ / ▼ ), or use one of the two 3D digi-

adjustors.

2. Press the 3D digi-adjustor (or ENTER) twice;

 the cursor jumps to the “

x “.

3. Select the destination phase for the copy using the

UP / DOWN buttons (▲ / ▼ ) or one of the two 3D

digi-adjustors;

 the “

x “ changes to a “ c “ = copy.

5. Press the ENTER button or one of the 3D digi-

adjustors to conclude the copy process.

18.5. Sub-menu: Properties

The Properties sub-menu is a dynamic menu. The dis-

play may look as shown below, depending on the

model type (fixed-wing or helicopter) of the active

memory:

18.5.1. Parameter:

Template

Fixed-wing models and helicopters

Information field; cannot be changed

This parameter indicates which model template was

used to set up the current model (Î 18.6.2.). The field is

only for the user’s information, and cannot be changed.

18.5.2. Parameter:

Mode

Fixed-wing models and helicopters

Parameter affects the active model

only

Adjust. range Mode 1 ... Mode 4

The mode (stick mode) parameter is used to define

which stick controls which function in the model. The

mode can be changed at any time either here or in the

Setup / Control menu (Î 13.3.1.).

18.5.3. Parameter:

Assignment

Fixed-wing models and helicopters

Information field; cannot be changed

This parameter shows the assignment (which transmit-

ter control operates which function) with which the cur-

rent model was set up. The field only provides informa-

tion to the user, and cannot be changed.

18.5.4. Parameter:

Throttle curve

Model helicopters only

The parameter affects the active

model only

Adjust. range ON, OFF

Here you can determine whether your current model

helicopter requires a throttle curve to control the throt-

tle function, or whether fixed values are to be used (e.g.

electric helicopters with brushless motor in “regulator”

mode) (Î 14.1.11.).

18.5.5. Parameter:

Shift

, US/ES

For

US/ES language set only, with

fixed-wing models and helicopters

Parameter affects the active model

only

The menu point “Shift Switch” only appears if you are

using the

US/ES language set. When other makes of

receiver are used it is sometimes necessary to adjust

Shift to suit the receiver:

+ = Positive shift

- = Negative shift

! Note:

If you intend using the system with components made

by a variety of manufacturers, please note that careful

testing is essential. It is not possible for MULTIPLEX

Modellsport GmbH to guarantee that its systems will

function perfectly with products made by other com-

panies.

18.5.6. Parameter:

Name

Fixed-wing models and helicopters

Parameter affects the active model

only

This is where you can enter a name for your model; the

name can be up to 16 characters long. When you set up

a new model, it is initially assigned the name of the

model template you have used. The text for the name is

entered using the keypad; the procedure is described in

Section 11.1.3.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Multiplex ROYALevo7 Seite 52

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Multiplex ROYALevo7

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info