1. Do not attempt to modify the unit, modifying the unit may cause an accident.
2.
equipment and automotive accessories may be dangerous and could expose you to the risk
of electric shock or other hazards.
3. Stop the vehicle before carrying out any operation that could interfere with your driving.
4. Keep the volume at a level which you could hear sounds from outside the vehicle.
5.
is between +60°C and -10°C before turning on your unit.
6.
the fuse holder
7.
may result in re.
8. Using this unit without running the engine can result in battery drainage.
9. Use only in cars with a 12 volt negative ground.
10.
before using it. Press RESET button on the front panel with pointed object (such as ball-point
pen) to reset the unit to its initial settings.
Notice on disc
•
malfunctions.
• Do not place more than one disc in the disc compartment.
• Only 12cm discs are compatible.
•
clean the disc with a cleaning cloth. Wipe the disc from the center out. Don’t store discs in
places with high temperatures or high humidity
the disc in its case.
•
CD-Burner
Important Note
• Before transporting the unit, remove the disc from the disc compartment.
PR
UNP
CONNE
INST
LOC
BASI
LIST
SOUN
When you unpack your new car radio, make sure that you have removed all the accessories
and information papers:
Main unit
User manual
Accessories:
16. INT / 2 button (T
17. RPT / 3 button (T
18. RDM / 4 button (T
19. -10 / 5 button (T
20. +10 / 6 button (T
21.
22 USB port
23. MIC
1. MUTE button (T
2. POW button (T
3. (eject button)
4. VOL / SEL enter knob
5. / BAND button
6. DISC slot
7. LCD display
8. MICRO SD slot
9. RESET button
10. CLK button (TTRANS (Transfer call)
1 / MODE button ( End call / T
12. button
13. button
14. AMS / button (Automatic storing; Search a track)
15. / 1 button (T
Caution!
-
may cause the unit to malfunction or damage the vehicle’s electrical system.
-
and right channel speaker cables each other or to the vehicle body
- Make sure all the connections are completely correct before turning on your unit.
T
Press POW button to turn on the unit. Press this button again to turn off the unit.
Note: When the unit is off, press any key except to turn on the unit.
Selecting the mode
When the unit is on, press MODE button repeatedly to select different source mode: Radio
DISC USB MICRO SD AUX PHONE
Note:
- USB, SD mode can not be selected if no such source was plugged in the unit.
-
to the unit.
Adjust time:
1. CLK button to enter into setting mode. The hour digits
will ash.
2.
again to conrm the hour value.
3.
minute value. Press CLK button to conrm.
Noted: It will conrm your setting if no key is pressed within 5 seconds.
Time display
Press CLK button to display the current time when unit is ON.
NOTE: It will return to normal play mode if no key is pressed within 5 second.
Reset the unit
Operating
TRESET button on front with a pointed object. When some
errors occur in display
memorized functions.
The unit is installed to be an anti-theft one. The chassis of the unit wears a sliding metal housing.
Please do the connection of the power
of the instruction book. Then install the sliding metal housing in the car as follows:
Selecting band
In tuner mode, repeatedly press BAND button to select bands in following order: FM1
FM2 FM3.
Manual/automatic tuning
- Manual T
Press and hold button or until “MANUAL” shows on display or
continuously to select a station upward or downward. Press and hold button or to tune
the station with a faster speed.
Note: it will return to automatic tuning mode if no key is pressed within 2 seconds. “AUTO” will
shows on display 2 seconds.
- Automatic Tuning
Press or once, the radio automatically searches a station upward or downward respectively
and plays when it nds a station. Press or once to stop scanning.
Scanning and memorizing stations
- By AMS / button.
1. AMS / button for 3 seconds to start scanning for stations
and store them automatically in memory
2. Press AMS / button once to preview the preset stations. T
again the AMS / button.
- By number button 1-6
1. T or button.
2. 1- 6 Number buttons for 2 seconds until display shows the
corresponding number
button.
3. Under radio mode, press 1- 6 Number buttons to listen to stored stations.
4.
button for more than 2 seconds to store the station on this number button.
Note: The unit can be stored up to 6 stations for each band.
RDS (Radio Data System)
This unit has a built-in RDS decoder system that supports broadcast stations transmitting RDS
data. This system can automatically switch to the broadcast station with the best reception as you
move on long
(PTY) is broadcast from a RDS station, no matter what mode you are in. this broadcast is received.
Press and hold volume knob, the unit will enter setting menu.
Shortly press volume knob to choose your desire item. Rotate volume knob to choose
corresponding setting desired: T EON (ON/OFF) PTY
(PTY OFF/ MUSIC/ SPEECH) T PI SOUND/ PI MUTE
- Alternative frequency (AF)
When the
frequencies.
very short time. (When
Segment off:
Segment on:
Segment ashing:
- T
In
broadcast is received as top priority regardless of the function mode so you can listen to it.
If you select T
announcement broadcast reception is cancelled and the unit goes into the T
- T
T
When newly tuned station does not receive TP information for 5 seconds, the radio ret
station which doesn’t have the same station (PI) as the last station, but has the TP information.
When TP information gets lost at the current station for retune time which is set by RETUNE S
or RETUNE L, the radio starts to retune to next same PI station. When PI station does not catch
in one cyclic search, the radio retunes to next station with TP information.
Note: In T
because
very weak, or the current station has no “TP” signal. (The higher priority is TP rather than PI.)
T
When this mode is selected, any automatic retune mode is not activated. Only double beep
sound (ALARM) is output. So, in this mode, the unit keeps the current station anyhow
priority is higher than TP
When newly tuned station doesn’t have TP information for 5 seconds, beeps come out. When
TP information gets lost at the current station for retune time, the beep sound is output.
When newly tuned station doesn’t have RDS signal, “PI SEEK” is suppressed somewhat.
V
T
Muting the sound
When the unit is ON, press MUTE to mute the sound. Press again to restore.
Using volume knob to select sound feature
Repeatedly press volume knob
T “TRE”
(Treble) “BAL” (Balance) “FAD” (Fader) LOUD ON/OFF DSP OFF/
CLASSICS/ POP/ ROCK DX/ LOCAL STEREO/MONO VOL.
After selecting the desired mode, you can adjust the level by rotating the volume knob.
Preset equalizer (EQ)
When you are listening to pop music, classic music or rock music, use the equalizer to adjust
the sound quality
to select different equalizer mode in following order: DSP OFF CLASSICS POP
ROCK.
Switching Loudness On/off
By this function, you can increase the low frequency
Noted: Please refer to “LISTENING TO
M-1229 BT
USER MANUAL
CAR RADIO CD/MP3 PLA
USB/MICRO SD
Please read the instruction carefully before operating the unit.
Do not connect the ignition wire (red) and the battery wire (yellow), it may cause a short
circuit, even result in re.
English GB - 1 GB - 2 GB - 3
GB - 4 GB - 5 GB - 6 GB - 7
Front RCA
Left
Rear RCA
Left
Front RCA
Right
Rear RCA
Right
Antenna
Socket
Ground wire (Black)
ISO cable
(Not supplied)
+12VConstant Power Supply (Yellow)
Power Antenna Amplifier Turn On (Blue)
A8
A5
A4
(GREEN/BLACK)
(VIOLET/BLACK)
(WHITE/BLACK)
+ +
+
-
-
(VIOLET)
(GRA
+
Speaker
Rear Right
Front Right
Speaker
+
-
(WHITE)
+
(GRA
-
-
Speaker
Front Left
+
-
-
(GREEN)
+
Speaker
Rear Left
B8
B7
B6
B5
B4
B3
B2
B1
Ignition wire (Red)
AB
FUSE
6 8
5
3 7
6 8
5
3 7
4-SPEAKER SYSTEM
ISO connector B
ISO connector A
Fuse holder (15A)
AR-3740A IB MUSE 001 REV0 GB.indd 1 2016/10/21 8:55:45
