Bedienungsanleitung NAD M17 AV (Seite 23 von 38) (Englisch)

562261

Zoom out

Zoom in

Vorherige Seite

1/38

Nächste Seite

TRIGGER SETUP

The M17 features three congurable +12V DC Trigger Output that can be

used to activate a component or system it is fed into. A Trigger Input is also

available to turn on the applicable link it is associated to. Use a combination

of [W/E/R/T] and [ENTER] keys to navigate through the Trigger Setup

menu parameters.

TRIGGER OUT

Triggers are low voltage signal used to turn on/o other compliant devices.

The M17’s three +12V DC Trigger Output (Trigger 1 Out, Trigger 2 Out and

Trigger 3 Out) are dependent upon the mode they are associated with. The

following are the choices where +12V DC output can be assigned.

Main: +12V DC is available at the assigned Trigger Out when the M17 is

at powered state.

Zone 2, Zone 3, Zone 4, Zone 2+3+4: When the applicable Zone is at

powered state, +12V DC is available at the assigned Trigger Out.

Main+Zone 2, Main+Zone 3, Main+Zone 4, Main+Zone 234:

+12V DC is available from Trigger Out when either the M17 or the

applicable Zone is powered up.

Source Setup: If Trigger Output is linked to “Source Setup”, +12V DC

is available at Trigger Out whenever the particular assigned Source is

selected. Please see also separate discussion about “Trigger Out” under

the Source Setup (Normal View) section.

DELAY

The availability of +12V DC at Trigger Out can be regulated. If it is desired

that +12V DC is available without delay the moment Trigger Out is linked

to its assigned setting, set Delay to 0s. Otherwise, one can select through a

delay time of 1s to 15s.

AUTO TRIGGER IN

Auto Trigger IN allows external system controllers to toggle the associated

section of the M17 from “Standby” to “On” and vice versa. When the +12V

TRIGGER IN switch at the rear panel is set to AUTO, a +12V DC input at

Trigger IN will power ON the section where Trigger IN is assigned.

Main: From standby mode, the M17 is powered ON when +12V DC is

applied at Trigger IN.

Zone 2, Zone 3, Zone 4: Applicable Zone is turned ON whenever

+12V DC is present at Trigger IN.

All: Main, Zone 2, Zone 3 and Zone 4 as described above will all be

activated given a +12V DC input at Trigger IN.

WARNING

If “Auto Trigger In” at Trigger Setup menu is assigned to “Main” or “All”

and the +12V TRIGGER IN switch is set to “AUTO” mode, the (Standby)

button in the front panel as well as the corresponding ON/OFF function

keys in the HTRM 2 remote control will be disabled eectively handling

this function to an external controller. Slide to “OFF” the +12V TRIGGER

IN switch to maintain normal power ON/OFF function procedures.

LISTENING MODE SETUP

The M17 has various listening mode options and is mostly congurable.

These are provided to reproduce a variety of sound eects depending upon

the content of the source to be played. Use a combination of [W/E/R/T]

and [ENTER] keys to congure the following settings.

LISTENING MODES

The audio format as detected by the selected Source can be automatically

congured and processed through the following options:

DOLBY

Dolby Digital is the multi-channel digital signal format developed in the

Dolby laboratories. Discs bearing the Dolby Digital (double-D symbol) logo

were recorded with up to 5.1 channels of digital signals, reproducing a

much better sound quality, with dynamic and spatial sound sensations that

are much better than in the previous Dolby Surround.

A Dolby Digital audio input can be congured relative to its format as

follows

Stereo: If the detected audio is of Dolby stereo format, you can default

it to one of the following settings - Pro Logic, PLIIx Movie, PLIIx Music or

None.

Surround: If the detected audio is of Dolby Surround format, you can

default it to one of the following settings - Surround EX, PLIIx Movie,

and PLIIx Music, Stereo Downmix or None.

None: If “None” is selected, the Dolby Digital signal will be defaulted

to the “Stereo” or “Surround” settings set forth at the “PCM” option. See

discussion below about “PCM”

OPERATION

USING THE M17  SETUP MENU

ENGLISHFRANÇAISESPAÑOLITALIANODEUTSCHNEDERLANDSSVENSKAРУССКИЙ

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

NAD M17 AV Seite 23

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von NAD M17 AV

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info