Bedienungsanleitung NAD T 567 (Seite 14 von 30) (Englisch)

493500

Zoom out

Zoom in

Vorherige Seite

1/30

Nächste Seite

LANGUAGE SETUP MENU

DISPLAY MENU

Select a language for the SETUP menu and on-screen display.

DISC MENU/AUDIO/SUBTITLE

Select the language you prefer for the audio track (disc audio), subtitles

and the disc menu. Depending on the media, only those Disc Audio, Disc

Subtitle and Disc Menu languages recorded on the media are available.

When a language is chosen, it will become the default setting unless the

media overrides the settings.

Original: Refers to the original language in which the disc was

recorded.

Other: Select “Other” if the desired language is not on the list. Use

[D/F] to highlight “Other”, press [ENTER] and then input the 4-digit

language code using the number keys of the remote control. If

you enter the wrong language code, complete entering the 4-digit

numbers, press [ENTER] and then encode the correct 4-digit numbers.

See “LANGUAGE CODE LIST” under the main heading “REFERENCE” for a

list of applicable language codes.

O: If you choose for the disc subtitle not to come up, select “O”.

AUDIO SETUP MENU

Each disc has a variety of audio output options. Set the T 567’s AUDIO

options according to the type of audio system you use.

HDMI/DIGITAL OUTPUT

Select the audio output setting for HDMI OUT or DIGITAL AUDIO OUT port.

PCM Stereo: Select when connected to a two-channel digital stereo

decoder.

PCM Multi-Ch (HDMI only): Select when connected to a device with

multi-channel decoder. This is applicable to HDMI OUT only.

DTS Re-Encode: Select when connected to a device with DTS decoder.

Primary Pass-Thru: Select when connected to a device with LPCM,

Dolby Digital, Dolby Digital Plus, Dolby TrueHD, DTS and DTS-HD

decoder.

Refer also to the “AUDIO OUTPUT SPECIFICATIONS” section of “REFERENCE

TABLES” under the “REFERENCE” main heading.

SAMPLE FREQ. FREQUENCY

Set the sampling frequency of the audio signal.

48KHz: If your receiver or amplier is not capable of handling 96 kHz

and 192 kHz signals, select 48 kHz. When this choice is made, this unit

automatically converts any 96 kHz and 192 kHz signals to 48 kHz so your

system can decode them.

96KHz: If your receiver or amplier is not capable of handling 192 kHz

signals, select 96 kHz. When this choice is made, this unit automatically

converts any 192 kHz signal to 96 kHz so your system can decode them.

192KHz: If your receiver or amplier is capable of handling 192 kHz

signals, select 192 kHz. When this choice is made, a 192 kHz signal

passes through without any further processing.

Check the documentation of your amplier to verify its capabilities.

DRC DYNAMIC RANGE CONTROL

You can select the eective dynamic range (subjective range from soft

to loud) for playback of Dolby Digital or Dolby Digital Plus soundtracks. It

is useful when you watch your favorite action movie without disturbing

others at night.

On: The “On” setting is for late-night sessions or other times when you

wish to retain maximum dialog intelligibility while minimizing overall

volume levels.

O: To maintain full dynamic range, set to “O”.

Auto: For Dolby TrueHD sources, set the Dynamic Range Control to

“A ut o”.

NOTE

DRC setting can be changed only at STOP mode or when there is no disc

loaded.

DTS NEO:6

Setup this option to enjoy multi-channel surround sound with a 2-channel

audio source. This option is applicable only if the T 567 is connected to a

multi-channel audio receiver via HDMI OUT.

O: Output stereo sound only.

Music: Output multi-channel sound that are optimized for music

recordings.

Cinema: Output multi-channel sound that are optimized for lm

soundtracks.

LOCK SETUP MENU

(APPLICABLE TO BD AND DVD PLAYBACK ONLY)

Some movies contain scenes that may not be suitable for children to view.

Many of these discs contain parental control information that applies to

the complete disc or to certain scenes on the disc. Movies and scenes are

rated depending on the country. Some discs oer more suitable scenes as

an alternative.

OPERATION

USING THE T 567

ENGLISH PORTUGUÊSFRANÇAIS ESPAÑOL ITALIANO DEUTSCH NEDERLANDS SVENSKA РУССКИЙ

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

NAD T 567 Seite 14

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von NAD T 567

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info