Bedienungsanleitung NAD T 567 (Seite 15 von 30) (Englisch)

493500

Zoom out

Zoom in

Vorherige Seite

1/30

Nächste Seite

PASSWORD

When you access Lock Setup Menu for the rst time, it is advised that you

setup rst your Password.

1 While at “Password” line menu, press [S] or [ENTER] to select “New”

option.

2 Input your desired 4-digit password code.

3 Enter again the 4-digit password code for verication.

4 With “OK” highlighted, press [ENTER] to conrm password entry. You

have now setup your Parental Rating password.

CHANGE PASSWORD

You can change the password for parental control. Enter your four-digit

password when prompted on the screen.

1 While at “Password” line menu, press [S] or [ENTER] to select “Change”

option.

2 Enter your old four-digit password using the numeric buttons (0-9).

With “OK” highlighted, press [ENTER] to conrm password entry.

3 Follow the same above procedure about setting up your new password.

DVD RATING

The parental rating feature allows you to block access to scenes greater

than the rating you set up, thereby preventing your children from viewing

material you believe is unsuitable. To activate “DVD Rating”, please be

guided by the following:

1 While at “DVD Rating” line menu, press [S]. A “Password” prompt will

come up in the menu screen.

2 Input the password you have setup.

3 Upon entering the password, you can now set the parental rating level

you prefer. Use [D/F] to step through the rating levels.

4 Press [ENTER] to conrm your rating selection.

RATING 18

Rating “1” (Kids) has the most restrictions and Rating “8” (Adult) is the least

restrictive.

UNLOCK

If you select “Unlock”, parental lock is not active and the disc plays in full.

NOTE

If you set a rating level for the player, all disc scenes with the same rating

level or lower are played. Higher rated scenes are not played unless an

alternate scene is available on the disc. The alternative must have a

lower rating. If no suitable alternative is found, playback stops. You must

enter the 4-digit password in order to play the disc.

RESET PASSWORD

Should you forget your password, you can reset it by using the following

steps.

1 Remove any disc loaded.

2 Select “Password” option.

3 Use the number button to enter “210499”. “PINCLR” appears in the VFD

and the password is reset.

BLURAY DISC RATING

Set an age limit for rated BD-ROM playback.

1 While at “BD Rating” line menu, press [S]. A “Password” prompt will come

up in the menu screen.

2 Input the password you have setup.

3 Upon entering the password, you can now set the age limit for BD

viewing.

255: All BD ROM can be played back.

0 - 254: Prohibits playback according to the ratings recorded on the BD

ROM.

4 Press [ENTER] to conrm your BD Rating selection.

AREA CODE

Enter the code of the country/area whose standards were used to rate your

DVD. See “AREA CODE” under the main heading “REFERENCE” for a list of

applicable area codes.

1 While at “Area Code” line menu, press [S]. A “Password” prompt will come

up in the menu screen.

2 Input the password you have setup. Press [ENTER].

3 Select desired “Area Code” using [D/F] buttons.

4 Press [ENTER] to conrm your area code selection.

NETWORK SETUP MENU

The NETWORK settings are needed to use the BD Live feature. By

connecting the T 567 to the internet, special BD-ROM sites can be enabled

by some BD-ROM discs. Online contents can be downloaded and watched

if a BD-ROM site contains links to future movie trailers, bonus contents and

other related features.

Network connection is also necessary to gain access to shared devices or

server within the same network.

Ensure proper broadband connectivity when conguring the following

NETWORK features.

CONNECTION SETTING

Press [S] or [ENTER] to setup your network connection. An OSD menu

prompt allows you to select “Wired” or “Wireless”.

Follow the below procedure in setting up your “Wired” or “Wireless”

connection.

WIRED NETWORK

Selecting “Wired” network provides the best performance for your network

connection. Wired connection allows attached devices direct connection to

the network and thus not subject to radio frequency interference.

1 Select “Wired” from the “Connection Setting” menu.

OPERATION

USING THE T 567

ENGLISHPORTUGUÊS FRANÇAISESPAÑOLITALIANODEUTSCHNEDERLANDSSVENSKAРУССКИЙ

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

NAD T 567 Seite 15

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von NAD T 567

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info