Bedienungsanleitung NAD t 585 (Seite 14 von 26) (Englisch)

137301

Zoom out

Zoom in

Vorherige Seite

1/26

Nächste Seite

XOVER CROSSOVER FREQUENCY

Set the frequency level where bass redirection starts. Frequencies below

the set level are redirected to the subwoofer while those above are not

redirected. Crossover frequency can be set from 80Hz up to a maximum of

150Hz; it is applicable only to SUBWOOFER.

TEST

Select ON to test the signal of each speaker. Adjust the volume to match

the volume of test signals memorized in the system. You can adjust the

volume while operating the test tone - use [ ] buttons to select

Volume or Speaker option then use [ ] buttons to select speaker or

adjust volume level. If you adjust the volume while operating the test tone,

the test tone will be held paused in the current speaker channel.

RETURN

Press to go back to the previous menu screen.

MASTER VOLUME

Adjust the audio output level of the T 585 from -50dB up to a maximum of

0dB.

DOWNMIX

Downmix allows you to enjoy a 5.1 or 7.1 channel media regardless of how

many speakers you have. In Downmix, the analog stereo output could be

processed into two dierent types of stereo Downmix.

Lt/Rt: Surround-compatible Downmix known as Left-total/Right-total,

also known as Lt/Rt. This is a multi-channel source suitable for Dolby

Pro Logic II, Dolby Pro Logic IIx, or other matrix decoding. The Lt/Rt

Downmix sums up all the Surround channels, attenuates them by 3

dB and adds them out-of-phase to the Left Front speaker channel and

in-phase to the Right Front speaker channel. This allows a home theater

decoder to produce Front Left, Center, Front Right, Surround Left and

Surround Right as well as Surround Back Left and Right channels.

Stereo: Stereo Downmix is suitable for playback on a two-channel

stereo system or on headphones. Stereo Downmix adds the Center, Left

Surround, and Right Surround channels discretely to the Stereo Left and

Stereo Right speaker channels. This preserves correct stereo separation

for stereo-only listening.

O: Audio content will not be subjected to downmixing.

DYNAMIC RANGE CONTROL DRC

With the DVD format, you can hear a program’s soundtrack in the most

accurate and realistic presentation possible, thanks to digital audio

technology. However, you may wish to compress the dynamic range of the

audio output (the dierence between the loudest sounds and the quietest

ones).

ON: The ON setting is for late-night sessions or other times when you

wish to retain maximum dialog intelligibility while minimizing overall

volume levels. This is applicable only for Dolby Digital soundtracks.

OFF: To maintain full dynamic range, set to OFF.

TEST TONE

A test tone can be enabled to help you check out availability of 5.1 channel

audio OUT and related connections.

ON: Test tone automatically cycles through each channel.

OFF: Stop test tone cycle.

If you do not hear the test tone, check your line and speaker connections or

5.1 SPEAKER SETUP congurations.

PARENTAL CONTROL SETUP MENU

Some movies contain scenes that may not be suitable for children to view.

Many of these discs contain parental control information that applies to the

complete disc or to certain scenes on the disc. Movies and scenes are rated

from 1 to 8, depending on the country. Some discs oer more suitable

scenes as an alternative.

RATING NORTH AMERICA VERSION ONLY

The RATING feature allows you to block access to scenes greater than the

rating you have set up, thereby preventing your children from being able

to view material you believe is unsuitable. To activate “Rating”, please be

guided by the following:

1 While at “Rating” line menu, press [ENTER].

2 “Password _ _ _ _” will appear indicating that a password is needed to

change the ratings level.

3 Input the password you have setup at the “Password” as discussed

below. Press [ENTER].

4 Upon entering the correct password, you can now set the parental

rating level you prefer. Use [ ] to step through the rating levels.

5 Press [ENTER] to select and save the rating level you have chosen.

RATING 18

Rating one (1) has the most restrictions and “8” is the least restrictive.

UNLOCK

If you select unlock, parental lock is not active and the disc plays in full.

NOTE

Should you forget your password, reset your password by restoring the

T 585 to its factory default settings. See “RESTORE SETTINGS” below on

how to reset the T 585 to its factory default settings.

COUNTRY CODE

Enter the code of the country/area whose standards were used to rate the

DVD video disc.

1 While at “Country Code” line menu, press [ENTER].

2 “Password _ _ _ _” will appear indicating that a password is needed to

change the ratings level.

3 Input the password you have setup at the “Password” as discussed

below. Press [ENTER].

4 Upon entering the correct password, you can now set the Country

Code.

5 Use [ ] to select the rst character. Press [ ] to go to the second

character.

6 Use [ ] to select the second character. Press [ENTER] to nalize and

save the selected country code.

OPERATION

USING THE T 585  SETUP MENU

ENGLISH FRANÇAIS ESPAÑOL ITALIANO DEUTSCH NEDERLANDS SVENSKA РУССКИЙ

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

NAD t 585 Seite 14

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von NAD t 585

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info