Bedienungsanleitung NAD t 585 (Seite 15 von 26) (Englisch)

137301

Zoom out

Zoom in

Vorherige Seite

1/26

Nächste Seite

SYSTEM SETUP MENU

PASSWORD

PASSWORD is needed to gain access to the “Rating” and “Country Code”

items of the PARENTAL CONTROL setup menu section.

1 While at “Password” line menu, press [ENTER].

2 “New Password _ _ _ _” will appear indicating that you have to enter

a new password. “New Password _ _ _ _” will only be available when

you use for the rst time your T 585 or when you have restored it to its

default settings.

3 Input your desired 4-digit password and then press [ENTER].

4 Upon entering your new password, “Verify _ _ _ _” will appear

prompting you to re-enter the same 4-digit password to verify entry of

correct password.

5 Press [ENTER] to conrm password entry. Your new password is now

activated.

An existing password can be changed through the following steps.

1 While at “Password” line menu, press [ENTER].

2 “Old Password _ _ _ _” will appear indicating that you have to enter your

existing password.

3 Input your existing 4-digit password and then press [ENTER].

4 “New Password _ _ _ _” will appear indicating that you now have to

enter a new password.

5 Upon entering your new password, “Verify _ _ _ _” will appear

prompting you to re-enter the same 4-digit password to verify entry of

correct password.

6 Press [ENTER] to conrm password entry. Your new password is now

activated.

NOTE

If the password entered is incorrect, you will remain in the same menu

screen like “Old Password_ _ _ _” or “Verify _ _ _ _”. You cannot move

forward to the next sequence unless the correct password is entered.

Press [ ] to exit the sequence if you are unable to enter the correct

password.

RESTORE SETTINGS

If you desire to reset the T 585 and restore all its factory default settings, the

following steps should be followed.

1 While at “Restore Settings” line menu, press [ENTER].

2 At “Yes” menu line, press [ENTER].

3 “Password _ _ _ _” will appear. In quick succession, press 5851 for North

American version model or 5852 for Europe version model.

4 “Load default AH Setting!” (North American version) or “Load default C

Setting!” (Europe version) will be shown in OSD – this indicates that the

T 585 is already restored to its factory default settings.

OTHERS

PBC : Set Playback Control (PBC) to On or O.

ON: Video CDs with PBC are played according to the PBC.

OFF: Video CDs with PBC are played the same way as Audio CDs.

AUTOPLAY : You can set up the DVD Player to automatically start disc

playback upon loading of a DVD disc. If Auto Play mode is set to ON, this

DVD player will search for the title that has the longest playback time and

then play back the title automatically.

ON: Auto Play function is active.

OFF: Auto Play function is not active.

NOTE

The Auto Play function may not work for some DVDs.

OPERATION

USING THE T 585  SETUP MENU

ENGLISHFRANÇAISESPAÑOLITALIANODEUTSCHNEDERLANDSSVENSKAРУССКИЙ

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

NAD t 585 Seite 15

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von NAD t 585

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info