Bedienungsanleitung NAD T 758 (Seite 8 von 42) (Englisch)

745046

Zoom out

Zoom in

Vorherige Seite

1/42

Nächste Seite

1 DIGITAL AUDIO IN (COAXIAL 1-3, OPTICAL 1-3)

• Connect to the corresponding optical or coaxial digital output of

sources such as CD or BD/DVD players, digital cable box, digital

tuners and other applicable components.

• Coaxial and optical digital input association is congurable via the

Source Setup item of the Setup Menu OSD.

DIGITAL AUDIO OUT (OPTICAL, COAXIAL)

Connect the optical or coaxial DIGITAL OUT to the corresponding

digital audio input of compatible devices such as receivers, computer

soundcard or other digital processors.

2 HDMI (HDMI 1-4, HDMI MONITOR OUT)

• Connect the sets of HDMI input to the HDMI OUT connectors of

source components such as DVD player, BD player or HDTV satellite/

cable box. Connect the HDMI Monitor OUT to a HDTV or projector

with HDMI input.

3 FM ANTENNA TERMINAL

• Connect the supplied lead-type FM antenna to the FM antenna

input. Extend the lead. Experiment freely with your antenna

placement and orientation until you get the clearest sound and

lowest background noise.

• Fix the antenna in the desired position by using thumb tacks, push

pins or any suitable means.

AM ANTENNA TERMINAL

The AM loop antenna supplied with the T 758 (or a suitable

replacement) is required for AM reception.

• Open the clip terminal lever; insert the wire making sure to match

the color-coded (white and black) ends of the wire to that of the

terminal and close the lever ensuring that the lever locks the wire in

place.

• Testing dierent positions for the antenna may improve reception;

vertical orientation will usually produce the best results. Antenna

proximity to large metal objects (appliances, radiators) may impair

reception, as well as attempts to lengthen the wire to the loop.

• Refer also to the item about ASSEMBLING THE LOOP ANTENNA at

the LISTENING TO AM/FM RADIO section of the OPERATION page.

4 AUDIO 1 - 3

These comprise the T 758’s other sets of principal input. Connect these

analog audio input ports to the corresponding audio output ports of

source components such as CD players or other line level audio sources.

• AUDIO 3 is the assigned default port for the audio output of the

separately sold NAD IPD (NAD IPD Dock for iPod) 1, NAD IPD 2 and

later variants.

IDENTIFICATION OF CONTROLS

REAR PANEL

ZONE 2

SURR-BACK/

ZONE 2

SURR-BACK/

ZONE 2

SURR-B

7.1 CH INPUT

IR IN

COMPONENT VIDEO INPUT 1COMPONENT VIDEO INPUT 2

COMPONENT VIDEO INPUT 3

VIDEO

S-VIDEO

IR OUT

2 1

TRIG OUT

+12V

MP DOCK

DATA PORT

MONITOR OUT

MON. OUT

SURR-B/ZONE 2

SWITCHED AC OUTLET

120V 60Hz 100W 1A MAX

1 2 3 4 6 7 1098

16 17

13 14 15

ATTENTION!

Please make sure that the T 758 is powered o or unplugged from the mains power source before making any connections. It is also advisable to power

down or unplug all associated components while making or breaking any signal or AC power connections.

ENGLISH PORTUGUÊSFRANÇAIS ESPAÑOL ITALIANO DEUTSCH NEDERLANDS SVENSKA РУССКИЙ

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

NAD T 758 Seite 8

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von NAD T 758

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info