Bedienungsanleitung NAD T 758 (Seite 16 von 42) (Englisch)

745046

Zoom out

Zoom in

Vorherige Seite

1/42

Nächste Seite

ABOUT THE ON-SCREEN DISPLAY (OSD)

The T 758 employs a simple, self-explanatory system of on-screen display

“menus” that will appear on the connected video monitor/TV. These are

required during the setup process (and are useful in day-to-day operation),

so be sure to connect the monitor/TV before proceeding with the setup.

DISPLAY THE OSD

Press [S], [s], [MENU] or [ENTER] buttons of the AVR 4 remote control or

front panel to display the T 758’s Main Menu on your video monitor/TV. If

the OSD does not appear, check your MONITOR OUT connections.

NAVIGATING THE OSD AND MAKING CHANGES

To navigate through the OSD menu options, please do the following using

the AVR 4 or corresponding front panel buttons:

1 Press [ S ] to select a menu item. Use [ D/F ] or in some cases, [ENTER],

to move up or down the Menu selections. Repeatedly press [ S ] to

advance or go further into the sub-menu of desired menu item.

2 Use [ D/F ] to set or change the parameter value (setting) of a menu item.

3 Press [ A ] to save the settings or changes done on the current menu or

sub-menu. Pressing [ A ] will also return the user to the previous menu

or exit from a particular menu.

MAIN MENU

The Main Menu contains the menu options for “Listening Mode”, “DSP

Options”, “Tone Controls”, “Zone Controls” and access to “Setup Menu”.

Follow the guidelines about “DISPLAY THE OSD” and “NAVIGATING THE OSD

AND MAKING CHANGES” to navigate through the menu options and their

sub-menu selections.

NOTE

The individual congurations set forth at “Listening Mode”, “DSP

Options” and “Tone Controls” are carried over whenever they are

enabled at A/V Presets setting. Please see the section “AV PRESETS” for

reference.

LISTENING MODE

The T 758 oers distinct listening modes, tailored for dierent types of

recording or program material. With a two-channel (Stereo) source, the

following listening modes can be selected.

STEREO

Output is directed to the front left/right channels. Low frequencies are

directed to the subwoofer if one is present in the Speaker settings. Select

“Stereo” when you wish to listen to a stereo (or monaural) production, such

as music CD or FM broadcast, without surround enhancement. Stereo

recordings whether in PCM/digital or analog form and whether surround-

encoded or not encoded, are reproduced as recorded. Multi-channel digital

recordings (Dolby Digital and DTS) are reproduced in “Stereo Downmix”

mode via the front left/right channels only as Lt/Rt (left/right-total) signals.

DIRECT

The analog or digital sources are automatically played in their native

formats. All the source’s audio channels are reproduced directly. This

mode recreates the original sound most faithfully thereby producing

outstandingly high quality audio. Note that the source must be at playback

mode for “Direct” to become available as a listening mode option. In order

to automatically playback your source in their native format, implement the

following settings.

1 Go to “Listening Mode Setup” under “Setup Menu”. At the “Listening

Modes” menu, set all Dolby, DTS, PCM and Analog settings to “None”.

With this setup, your source will be played back directly at its native

format.

2 Next, go to “A/V Presets” under “Setup Menu”. At “A/V Presets” menu, set

“Listening Mode” item to “Yes” and then save this setting among other

options, say to “Preset 1”, by selecting “Save Current Setup to Preset”.

3 Now, you can associate “Preset 1” to any of the “Source” settings. For

example, at Source 1 setting under “Source Setup (Normal View)”, scroll

down to “A/V Preset” item and set it to “Preset 1”. Thus whenever Source

1 is selected, the associated source will always be directly played back at

its native audio format.

PRO LOGIC

Two-channel recordings, whether stereo or surround-encoded, are

reproduced with Dolby Pro Logic surround processing, yielding output to

front left/right, center and discrete left/right surround channels (assuming

these are present in the current “Speaker Conguration”). The surround

channel is monophonic, but it is reproduced in both surround speakers.

OPERATION

USING THE T 758  MAIN MENU

ENGLISH PORTUGUÊSFRANÇAIS ESPAÑOL ITALIANO DEUTSCH NEDERLANDS SVENSKA РУССКИЙ

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

NAD T 758 Seite 16

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von NAD T 758

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info