Bedienungsanleitung NAD T 758 (Seite 22 von 42) (Englisch)

745046

Zoom out

Zoom in

Vorherige Seite

1/42

Nächste Seite

iPod SETUP

The iPod Setup menu allows you to preset the following associated settings

when iPod is the selected source:

Enabled: Select “Yes” to enable iPod as a Source or “No” to disable it.

Auto Connect: Select “Yes” to automatically enable and connect the

iPod player docked in the linked NAD iPod docking station when Source

5 (the default iPod source allocation in the T 758) is selected. Select “No”

if you do not want a docked iPod to be connected automatically.

Menu Timeout: Set the time for the OSD to revert to the “Now

Playing” display when the iPod menu has been left idle (no scrolling or

navigation being done) for the specied time out time. For the “Now

Playing” OSD to be shown, there should be a song paused or being

played before going to the iPod menu. You can set the “Menu Timeout”

between the range 5s to 60s at 5s increments. If you do not want for

the menu to timeout, select “O”.

SPEAKER SETUP

After connecting all ancillary sources and other combinations, the Speaker

Setup menu will guide you on how to manage and setup your speakers in

order to achieve optimum sound acoustics in your listening environment.

The following are the Speaker Setup Menu sections.

AUDYSSEY SETUP

It has been shown that many, if not most, surround sound systems are

not accurately congured and setup. This requires special knowledge and

instrumentation that the average person probably doesn’t possess.

The T 758 has the capability to automatically setup your own unique Home

Theatre’s speaker system. This is achievable through the T 758’s Audyssey Setup

feature along with the sophisticated digital electronics built into your unit.

The installation of your new T 758 is greatly simplied by Audyssey Setup

with the end result of delivering the best quality sound possible given the

type of speakers you have as well as your listening room’s dimensions.

Audyssey Setup takes up only a fraction of time to run compared with

setting up your speakers manually and then achieve results that rival other

expensive test and setup measuring devices.

The following measurements are performed:

• Detection: Speaker conguration is detected including the number

of surround speakers and whether a subwoofer and center channel is

connected.

• Size: T 758 crossover is set based on each channel’s signal handling

capability and the subwoofer crossover is automatically set.

• Level: SPL of each speaker is matched within 1dB at the microphone

position.

• Distance: Accurately set the appropriate distance of each speaker

position as well as the subwoofer with respect to the microphone

position.

• Polarity: The setup program will detect and notify the user if any

speakers are connected improperly. Incorrect polarity can ruin the

illusion of realism oered by surround sound.

This is a one-time setup, unless speakers are moved or changed, in which

case Audyssey Setup should be performed again.

OPERATION

USING THE T 758  SETUP MENU

ENGLISH PORTUGUÊSFRANÇAIS ESPAÑOL ITALIANO DEUTSCH NEDERLANDS SVENSKA РУССКИЙ

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

NAD T 758 Seite 22

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von NAD T 758

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info