Bedienungsanleitung NAD T 758 (Seite 20 von 42) (Englisch)

745046

Zoom out

Zoom in

Vorherige Seite

1/42

Nächste Seite

SOURCE SETUP

There are three sub-menu items under Source Setup. These are Source

Setup (Normal View), Source Setup (Table View) and iPod Setup.

SOURCE SETUP (NORMAL VIEW)

The Source Setup (Normal View) menu makes it possible to set, allocate or

change the following settings.

SOURCE

The T 758 is equipped with ten congurable Sources. The settings for each

Source are dependent upon the congurations set forth in the parameters

for that particular Source window.

To change or toggle through the Sources, scroll to “Source”, press [S] button

and then ENTER or [D/F]to move up or down the Source selections.

NOTE

Source 5 is defaulted to iPod. Remove the default setting of Source 5 to

iPod via the following procedure:

1 Go to “iPod Setup” menu under the “Source Setup” menu. At “iPod

Setup” menu, set “Enabled” to “No”.

2 Then, go back to “Source Setup” menu and select “Source Setup (Normal View).

3 Go to Source 5 and set “Enabled” to “Yes”.

Source 5 can now be congured to any desired settings.

ENABLED

One can enable/disable a Source via this option. This is particularly useful

if only few Sources are used and one directly selects the Source from the

front panel, bypassing unused sources.

Select “Yes” to enable the particular Source or “No” to disable the Source.

NAME

A new Name maybe assigned to a Source label. For example, if your BD player is

attached to “Source 1”, it is possible to rename “Source 1” to “BD Player”.

In order to rename the Source label, scroll to the “Name” parameter. Press

[ S ] to go to the rst character. Then, press [ D/F ] to pick through the

alphanumeric selections.

Press [ S ] to move to the next character and at the same time save the

changes done on the current character. The name can be as long as twelve

characters.

The new Name will be shown in the VFD as well as on the OSD.

ANALOG AUDIO

The T 758 has six analog audio inputs including 7.1 input. These analog

inputs - Audio 1, Audio 2, Audio 3, Audio Front, Audio MP and 7.1 Input can

be variably assigned to each Source.

Scroll to “Analog Audio” and then press [ S ] and then [ D/F ] to select

and assign an analog audio input to the particular Source. There are three

choices - Audio, 7.1 Input or O.

When “Audio” is chosen, press [ S ] and then [ D/F ] to select and assign

the desired audio input - 1 to 3, Front and MP.

Select “7.1 Input” to choose the audio signal fed to the “7.1 Channel Input”.

If “O’ is selected, no incoming analog audio signal is selected by the

particular Source.

NOTE

An incoming digital signal present at the assigned digital input will always

take precedence over the assigned analog audio input, even if both are

present. To maintain the analog audio input for the particular Source, select

“O” at the “Digital Audio” setting of the same “Source” menu.

GAIN

Gain adjustment allows all sources to play back at the same volume level so

you don’t need to adjust the volume every time a new source is selected. It

is generally preferable to reduce the level of the loudest source rather than

making louder the softer sources.

Scroll to “Gain”, press [ S ] and then [ D/F ] to step through the desired

level from -12dB to 12dB.

OPERATION

USING THE T 758  SETUP MENU

ENGLISH PORTUGUÊSFRANÇAIS ESPAÑOL ITALIANO DEUTSCH NEDERLANDS SVENSKA РУССКИЙ

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

NAD T 758 Seite 20

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von NAD T 758

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info