Bedienungsanleitung NAD T 758 (Seite 19 von 42) (Englisch)

745046

Zoom out

Zoom in

Vorherige Seite

1/42

Nächste Seite

VOLUME

“Volume” refers to the adjustable secondary Zone 2 Volume level that can

be increased or decreased depending upon its settings. This is applicable

only if the Zone 2 Volume setting in the separate “Zone Setup” menu under

“Setup Menu” is set to “Variable”. If set to “Fixed”, this “Volume” item at the

Zone Controls section will not be available.

NOTES

• If Zone 2 is still ON and STANDBY button is pressed to switch the T 758

to standby mode, the VFD will be extinguished but the STANDBY LED

remains illuminated blue. This indicates that Zone 2 is still active. In

order to completely shut down the T 758 together with Zone 2, press and

hold STANDBY button until the STANDBY LED turns amber.

• Zone 2 is audio only and not associated with any video input sources.

SETUP MENU

The Setup Menu allows one to customize the operation of the T 758 to the ancillary

equipment used in one’s specic AV system. Unless your system exactly matches

the factory defaults as shown in the accompanying Quick Start Guide, you will need

to use the setup menu to congure the inputs of the T 758.

At Setup Menu, the following are congurable – Control Setup, Source

Setup, Speaker Setup, Zone Setup, Amplier Setup, Trigger Setup, Listening

Mode Setup, Display Setup and A/V Presets.

To access and navigate through Setup Menu and its sub-menu selections,

please refer to and follow the directions stated in the sections ‘Display the

OSD’ and ‘Navigating the OSD and Making Changes.’

CONTROL SETUP

The T 758 supports HDMI Control (CEC) and Audio Return Channel (ARC)

functions. Both functions are possible if external devices that also support

both features are interconnected with the T 758 via HDMI connection.

AUTO STANDBY

The T 758 can be setup to automatically go to standby mode if there is no

user interface interaction within 30 minutes.

On: T 758 will go to standby mode automatically in the absence of any

user interface interaction within 30 minutes.

O: T 758 remains active even though no user interface interaction is

detected.

CEC IN STANDBY

On: Enable CEC feature. Audio and video will continuously stream from

a CEC-enabled HDMI source to a CEC-enabled TV (with both devices

connected via T758).

O: T758 will not pass through any CEC message. Audio and video will

not be streamed from a CEC-enabled HDMI source to a CEC-enabled TV

(with both devices connected via T758).

HDMI CONTROL CEC

Consumer Electronics Control (CEC) is a set of commands that utilizes

HDMI’s two- way communication to allow for single remote control of any

CEC-enabled devices connected with HDMI. A CEC command will trigger

the necessary commands over HDMI for an entire system to auto-congure

itself to respond to the command.

When devices that support HDMI Control (CEC) are connected, the

following modes of operation can be executed via the T 758 or the external

device using any of the device’s remote control.

O: Applies to all CEC options below. At “O” setting, particular CEC feature

is defeated.

Power O: At “On” setting, the T 758 will automatically go to

standby mode if it receives a CEC standby command. On the other

hand, if the T 758 receives a CEC power up command, the T 758 will

correspondingly switch ON from standby mode.

Source Switch: At “On” setting, the T 758 will automatically switch

sources if another CEC device requests a Source change.

For example, if PLAY is pressed on a BD Player with CEC, the T 758

and TV with CEC will automatically switch to their respective input

connections – the T 758 switching to the HDMI input where the BD

Player is connected while the TV will switch to its input where the

T 758’s HDMI MONITOR OUT is connected. This completes the auto-

conguration – the BD Player is automatically played back using the

T 758 and TV.

Audio System: At “On” setting, the T 758 will broadcast a CEC message

indicating it is an active audio system. A CEC compatible TV will usually

mute its audio output when this happens. When this option is enabled,

the T 758 will also respond to CEC volume and mute commands. For

example, a CEC TV may forward the volume commands from its remote

to the T 758.

ARC Mode: Audio Return Channel (ARC) enables an ARC-enabled TV

to send audio data “upstream” to T 758.

This option has three choices: O, Auto or Source Setup.

Auto: When set to Auto, the T 758 will automatically attempt an

ARC audio connection to the TV whenever the TV announces over

CEC that it has become the active source. If an ARC connection can

be established, the T 758 will output the ARC audio signal no matter

what source is selected on the T 758 and will show “HDMI ARC” on

the VFD. The Auto option tends to work best when all your devices

support CEC and the Source Switch option is set to On.

Source Setup: When set to Source Setup, you can select “ARC” for

the digital audio input in the source setup screen. When you select

a source on the T 758 which is set for ARC, the T 758 will attempt

to initiate an ARC connection with the TV. When using this option,

you would probably also want to make sure Source Switch is o

otherwise other CEC devices may keep changing the T 758 source

when you want it to remain on the ARC source.

IMPORTANT NOTES

• “Audio System” must be set to “On” for “ARC mode” to manifest as an

option.

• “CEC in Standby” must be set to “On” for audio and video to

continuously stream from a CEC-enabled HDMI source to a CEC-enabled

TV (with both devices connected via T 758).

OPERATION

USING THE T 758  SETUP MENU

ENGLISHPORTUGUÊS FRANÇAISESPAÑOLITALIANODEUTSCHNEDERLANDSSVENSKAРУССКИЙ

NAD T 758 Seite 19

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von NAD T 758

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info