Bedienungsanleitung NAD T 775 (Seite 32 von 46) (Englisch)

602917

Zoom out

Zoom in

Vorherige Seite

1/46

Nächste Seite

VIEW XM INFORMATION

Toggle ‘INFO’ button to display the XM information of the selected channel

such as the artist name, song title, category or any other text as supplied for

the channel.

PRESETS

The procedure for storing XM channels is the same method as stated in the

section “Setting Radio Presets” under “Listening to Radio.”

For immediate recall of stored XM presets, toggle “TUNER MODE” button

until “P__” (the two blank spaces corresponding to the preset number) is

shown in VFD. Press the front panel’s “PRESET / PRESET ” button

or HTR 3’s keys to step up or down the stored presets that can be a

combination of AM, FM and XM channels.

LISTENING TO DAB RADIO

Until now, analogue radio signals such as FM or AM have been subject to

numerous kinds of interference on their way from the transmitter to your

radio. These problems were caused by mountains, high-rise buildings

and weather conditions. With Digital Audio Broadcast (DAB), you can now

receive CD-like quality radio programs without any annoying interference

and signal distortion. DAB broadcasts use digital signals rather than

traditional analogue transmissions, thus providing clear high quality

reception. You get far more robust reception and virtually hiss or crackle

free sound with DAB as long as you are within a good coverage area.

With DAB, the listener can scroll through a list of available stations - then

instantly tune to the station of his choice. There is no need either to

remember channel frequencies. All broadcasts are selected by simply

selecting the service name.

The T 775 makes it possible for you to enjoy listening to DAB broadcasts.

The T 775 has a Digital Audio Broadcast (DAB) module socket on the rear

panel for adding a separately sold and NAD-specied outboard DAB

module – the NAD DAB Adaptor DB 1. All the control software for this

format is included; just plug-in the module and start enjoying the CD-like

quality sound and expansive content selection available with DAB.

IMPORTANT NOTICE

 Unlessotherwisespecicallystated,navigatingoraccessingDAB

functionscanbeundertakenbyusingeithertheHTR3remotecontrol

orthefrontpanelbuttons.Ifthecontrolbuttonoriconbuttonbeing

referredtoisavailableontheHTR3remotecontrolandfrontpanel,then

thereferencetosaidbuttonisapplicabletoboththeHTR3remotecontrol

andfrontpanel.Thesameconditionappliestotheirequivalentbuttons.

NOTES

· WhenusingtheHTR3remotecontroltocarryoutDABcommands,

ensurethattheDEVICESELECTORissetto“TUNER”.

· HTR3’S[FMMUTE],[ENTER]and aretheequivalentremotecontrol

keysforthefrontpanelbuttons[TUNERMODE],[ENTER]and[TUNE

CONNECTING THE DAB MODULE

Plug-in the other end of the DIN connector (supplied with your NAD DAB

Adaptor DB 1) from the DAB module’s output port into the corresponding

DAB module input socket on the rear panel of the T 775. Select DAB mode

on the T 775 by toggling the [AM/FM/DB] button in the front panel.

NOTES

• TheNADDABAdaptorDB1isnotsuppliedwithyourT775.

• PleaserefertoNADDABAdaptorDB1installationguideforpropersetup

connectionoftheDB1withrespecttotheT775.

• IfthereisnoNADDABAdaptorDB1connected,theVFDwillshow

“CheckDABTuner”.

DAB OPERATION

With the separately sold NAD DAB Adaptor DB1 already connected to the

T 775, you can now carry out the T 775 to receive DAB broadcasts.

1 Toggle [AM/FM/DB] button until DAB mode. The VFD will show “No

Service List” indicating that there are no scanned DAB broadcast

services yet. This is the default mode of the DB1.

2 To tune to DAB broadcast services, press [TUNER MODE] and then

toggle the front panel’s [TUNE / ] to select either “Full Scan” or

“Local Scan”.

FULL SCAN will enable the scanning of the full range of digital

frequencies (Band III and L-Band).

LOCAL SCAN performs local scanning of available DAB services in your

area. Check with your dealer or visit www.WorldDAB.org to check the

applicable digital transmission frequencies in your area.

3 Upon selecting either “Full Scan” or “Local Scan”, automatic scanning

will be performed. This sequence cannot be interrupted. During the

sequence, the following message will be visible in the VFD.

The bars show the progress of the sequence. When scanning is

completed, the last number shown on the right side of the VFD

corresponds to the total number of DAB broadcast stations found. Then,

the rst station is tuned in (See “ALPHANUMERIC” section below to

understand the order or arrangement of stations).

OPERATION

USING THE T 775  AM/FM/DB/iPod

ENGLISH FRANÇAIS ESPAÑOL ITALIANO DEUTSCH NEDERLANDS SVENSKA РУССКИЙ

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

NAD T 775 Seite 32

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von NAD T 775

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info