Bedienungsanleitung NAD T 775 (Seite 33 von 46) (Englisch)

602917

Zoom out

Zoom in

Vorherige Seite

1/46

Nächste Seite

4 The strength of the incoming signal can be shown on the VFD by

pressing the [ENTER] button. The more segments visible in the lower

display line, the stronger the signal. By changing the position of the

antenna, you can increase the signal strength. You can also opt for an

external antenna. Consult an antenna professional for more information.

NOTE

 “NoServiceList”willalsobeshownintheVFDwhennostationsare

foundafterthescanningprocess.Ifthisoccurs,checktheconnection

andpositionoftheDABantennaorcallyourlocalDABbroadcast

providersforcoverageinformation.

SERVICE LIST

Follow the steps below to select through the DAB service stations found.

1 At DAB mode, press [TUNE / ] to step through the list of

available stations as shown in the lower display line of the VFD.

2 Press [ENTER] to select the desired station.

DAB TUNER MODE

Aside from “Full Scan” and “Local Scan” as already described above, pressing

the [TUNER MODE] button will also present you with other options namely

– Station Order, DRC, Manual Scan, Prune List and Reset

STATION ORDER

Use “Station Order” to sort the sequence of the listed stations. There are

three orders – Alphanumeric, Ensemble and Active.

1 While listening to a DAB broadcast, press front panel’s [TUNER MODE]

button and then [TUNE / ] to select “Station Order”. Press

[ENTER].

2 Toggle [TUNE / ] to select through “Alphanumeric”, “Ensemble”

and “Active”.

3 Press [ENTER] to select desired station order.

ALPHANUMERIC

This is the default setting. Stations are arranged by numbers rst and then

alphabetically by letters.

ENSEMBLE

Digital radio is broadcast as groups of data called ensemble. Each ensemble

contains a number of stations, transmitted at a set frequency. When

“Ensemble” is selected as the mode of station order, the radio stations are

arranged in the order of their ensemble names.

NOTE

 Ensembleisalsointerchangeablytermedas“multiplex”byother

broadcast providers.

ACTIVE

Active stations are listed at the top of the channel list. Those channels

that are in list but have no service in the area will be displayed last in the

channel list.

DRC

The level of compression of stations can be set to eliminate the dierences

in dynamic range or sound level between radio stations. Popular music

would normally be more compressed than classical music, resulting in

possible dierent audio levels when changing from one station to the

other. Setting the DRC to “0” means no compression, “1/2” indicates medium

compression and “1” shows maximum compression. No compression is

recommended, especially for classical music.

1 While listening to a DAB broadcast, press front panel’s [TUNER MODE]

button and then [TUNE / ] to select “DRC”. Press [ENTER].

2 Toggle [TUNE / ] to select through “DRC 0”, “DRC ½”and “DRC 1”.

3 Press [ENTER] to select desired DRC level.

MANUAL SCAN

This option allows you to directly tune to a desired channel and include it

in the service list (if not yet available at the time). You can also use manual

scan to assist you in positioning the DAB antenna for best reception of the

desired channel.

1 While listening to a DAB broadcast, press front panel’s [TUNER MODE]

button and then [TUNE / ] to select “Manual Scan”. Press

[ENTER]. The current channel and frequency are shown in the upper line

of the VFD. The “bars” at the lower line of the VFD indicate the signal

strength level of the current channel.

2 To select other channels, toggle [TUNE / ] to step through the

channel list. Release [TUNE / ] when you have arrived at your

desired channel. Channel and frequency are shown in the upper line

of the VFD. The “bars” at the lower line of the VFD indicate the signal

strength level of the current channel. To improve the reception of the

selected channel, adjust or reposition the DAB antenna until the best

reception is indicated.

3 Press [ENTER] to tune the selected channel.

NOTE

 Thenumberofensemblesandstationsthatcouldbescannedwillvary

depending on your location.

PRUNE LIST

There maybe situations wherein certain stations become inactive. The

“Prune List” option enables the deletion of these inactive stations in the

service list.

1 While listening to a DAB broadcast, press front panel’s [TUNER MODE]

button and then [TUNE / ] to select “Prune List”.

2 Press [ENTER]. Any inactive stations are automatically deleted.

OPERATION

USING THE T 775  AM/FM/DB/iPod

ENGLISHFRANÇAISESPAÑOLITALIANODEUTSCHNEDERLANDSSVENSKAРУССКИЙ

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

NAD T 775 Seite 33

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von NAD T 775

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info