Bedienungsanleitung NAD VISO TWO (Seite 23 von 34) (Englisch)

602923

Zoom out

Zoom in

Vorherige Seite

1/34

Nächste Seite

CHOOSING TUNER MODE

The front-panel [TUNER MODE] key is a dual-purpose control. In the normal

position, “FM STEREO” and “FM MUTE” icons on the VFD are lit; only the stations

with a strong signal can be listened to, and the noise between stations is muted.

Pressing the [TUNER MODE] button again (“FM STEREO” and “FM MUTE”

icons on the VFD are extinguished) allows distant and potentially noisy

stations to be received. Noise is reduced if the FM station signal level is less

than the FM Stereo threshold (since mono FM is inherently less noise-

prone) though at the sacrice of the stereo eect.

NOTE

 InFM/XM/DABmode,[MENU]buttonfunctionsthesamewayasthe

[TUNERMODE]button.

ABOUT USER NAMES

You can assign an eight character “User Name” to each radio preset, which

will show in the front-panel readout whenever that preset is recalled.

ENTERING USER NAMES

To name a radio preset “NEWS”, follow the procedure as below (The buttons

mentioned apply to the front panel’s buttons).

1 Recall the desired radio preset.

2 Press and hold the front panel [DISPLAY] button and then within ve (5)

seconds, use the [PRESET / ] buttons to select the rst character

of the name (“N” from the alphabetical list).

3 Press [TUNE ] button to select the character and correspondingly

move forward to the next position. (Press [TUNE ] to go back to the

previous character). Repeat this process for each character in sequence.

4 Press the [MEMORY] key to store the User Name and exit the text-entry

mode.

ABOUT RDS

The Radio Data System (RDS) permits compatible tuners to display text

determined by the broadcaster. The VISO TWO supports two RDS modes,

station-name (PS mode) and radio-text (RT mode). However, not every FM

station incorporates RDS in its broadcast signal. In most areas you will nd

from one to several RDS-enabled stations, but it is by no means impossible

that your favorite stations will not be broadcasting RDS data.

VIEWING RDS TEXT

When an RDS-enabled FM broadcast is tuned, after a brief delay the “RDS” icon

will light in the VISO TWO’s front panel readout and the readout’s character

section will show its station-name (PS) text: “ROCK101,”for example.

Press the front panel [DISPLAY] key to toggle the readout between this

and the station’s radio-text (RT) readout, if any, which might scroll song- or

artist-name or any other text of the station’s choosing.

ABOUT DAB RADIO

Until now, analogue radio signals such as FM or AM have been subject to

numerous kinds of interference on their way from the transmitter to your

radio. These problems were caused by mountains, high-rise buildings

and weather conditions. With Digital Audio Broadcast (DAB), you can now

receive CD-like quality radio programs without any annoying interference

and signal distortion. DAB broadcasts use digital signals rather than

traditional analogue transmissions, thus providing clear high quality

reception. You get far more robust reception and virtually hiss or crackle

free sound with DAB as long as you are within a good coverage area.

With DAB, the listener can scroll through a list of available stations - then

instantly tune to the station of his choice. There is no need either to

remember channel frequencies. All broadcasts are selected by simply

selecting the service name.

The VISO TWO makes it possible for you to enjoy listening to DAB

broadcasts. The VISO TWO has a Digital Audio Broadcast (DAB) module

socket on the rear panel for adding a separately sold and NAD-specied

outboard DAB module – the NAD DAB Adaptor DB 1. All the control

software for this format is included; just plug-in the module and start

enjoying the CD-like quality sound and expansive content selection

available with DAB.

CONNECTING THE DAB MODULE

Plug-in the other end of the DIN connector (supplied with your NAD DAB

Adaptor DB 1) from the DAB module’s output port into the corresponding DAB

module input socket on the rear panel of the VISO TWO. Select DAB mode on

the VISO TWO by toggling the [AM/FM/DB] button in the front panel.

NOTES

• PleaserefertoNADDABAdaptorDB1installationguideforpropersetup

connection of the DB1 with respect to the VISO TWO.

• Thefrontpanel[TUNERMODE]and[MENU]buttonsfunctionthe

samewayatDABmode.The[MENU/TUNERMODE]keyofHTR6isthe

equivalentbuttonforbothfunctions.

• IfthereisnoNADDABAdaptorDB1connectedatthecorrespondingDAB

inputterminalattherearpanel,theVFDwillshow“CHECKDABTUNER”.

OPERATION

USING THE VISO TWO  AM/FM/DB/iPod

ENGLISHFRANÇAISESPAÑOLITALIANODEUTSCHNEDERLANDSSVENSKAРУССКИЙ

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

NAD VISO TWO Seite 23

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von NAD VISO TWO

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info