Bedienungsanleitung NAD VISO TWO (Seite 24 von 34) (Englisch)

602923

Zoom out

Zoom in

Vorherige Seite

1/34

Nächste Seite

DAB OPERATION

With the separately sold NAD DAB Adaptor DB1 already connected to the

VISO TWO, you can now carry out the VISO TWO to receive DAB broadcasts.

1 Toggle [AM/FM/DB] button until DAB mode. When DAB mode is selected,

VFD will show “DAB initialize – Please wait” and then go to “Full Scan” mode.

FULL SCAN will enable the scanning of the full range of digital frequencies

(Band III and L-Band). This sequence cannot be interrupted.

The arrows show the progress of the sequence. When scanning is

completed, the last number shown on the upper right side of the VFD

corresponds to the total number of DAB broadcast stations found. Then,

the rst station is tuned in (See “ALPHANUMERIC” description below to

understand the order or arrangement of stations).

2 The strength of the incoming signal can be shown on the VFD by

pressing the [ENTER] button. The more “o” segments visible in the lower

display line, the stronger the signal. By changing the position of the

antenna, you can increase the signal strength. Consult an antenna

professional for more information.

NOTES

• “NostationsAvailable”willbeshownintheVFDwhennoDABstations

arefoundafterthescanningprocess.Ifthisoccurs,checktheconnection

andpositionoftheDABantennaorcallyourlocalDABbroadcast

providersforcoverageinformation.

• WhenusingHTR6buttonstonavigateDABoptions,ensurethatthe

“DEVICESELECTOR”settingofyourHTR6issetto“TUNER”.

SERVICE LIST

Follow the steps below to select through the DAB service stations found.

1 At DAB mode, press [TUNE / ] to step through the list of

available stations as shown in the lower display line of the VFD.

2 Press [ENTER] to select the desired station.

DAB TUNER MODE

Aside from “Full Scan” as already described above, pressing the [MENU]

button will also present you with other options namely - Local Scan, Preset

Tune, Station Order, Tune Aid, Dynamic Range and Prune List

LOCAL SCAN

LOCAL SCAN performs local scanning of available DAB services in your area.

Check with your dealer or visit www.WorldDAB.org to check the applicable

digital transmission frequencies in your area.

1 While listening to a DAB broadcast, press front panel’s [MENU] button

and then [TUNE / ] to select “Local scan”. Press [ENTER].

2 Local scan of available DAB services in your area will start. The arrows

show the progress of the sequence. When scanning is completed, the

last number shown on the right side of the VFD corresponds to the total

number of DAB broadcast stations found. Then, the rst station is tuned in.

PRESET TUNE

Use this option to select a DAB preset station.

1 While listening to a DAB broadcast, press front panel’s [MENU] button

and then [TUNE / ] to select “Preset tune”. Press [ENTER].

2 Press [TUNE / ] to step up or down between presets. Note that

Presets must have been previously stored.

3 Press [ENTER] to select desired preset number.

SETTING DAB PRESETS

The VISO TWO can store as many as 99 DAB stations of your favorite DAB

broadcast for immediate recall.

1 To store a DAB preset, rst tune the DAB broadcast, and then press the

front panel [MEMORY] button. The VFD will show a “Preset Memory”

and the next available vacant Preset number (the number is blinking).

2 Press [MEMORY] button again to store the desired DAB broadcast on

the Preset number shown or use the [TUNE / ] keys to select

another available Preset number.

3 Then, press [MEMORY] key button again. Your desired DAB broadcast is

now stored in the assigned presets.

STATION ORDER

Use “Station order” to sort the sequence of the listed stations. There are four

orders – Alphanumeric, Active, Ensemble and Favourite.

1 While listening to a DAB broadcast, press front panel’s [MENU] button

and then [TUNE / ] to select “Station Order”. Press [ENTER].

2 Toggle [TUNE / ] to select through “Alphanumeric”, “Active”,

“Ensemble” and “Favourite”.

3 Press [ENTER] to select desired station order.

ALPHANUMERIC

This is the default setting. Stations are arranged by numbers rst and then

alphabetically by letters.

ACTIVE

Active stations are listed at the top of the channel list. Those channels

that are in list but have no service in the area will be displayed last in the

channel list.

ENSEMBLE

Digital radio is broadcast as groups of data called ensemble. Each ensemble

contains a number of stations, transmitted at a set frequency. When

“Ensemble” is selected as the mode of station order, the radio stations are

arranged in the order of their ensemble names.

NOTE

 Ensembleisalsointerchangeablytermedas“multiplex”byother

broadcastproviders.

FAVOURITE

The VISO TWO memorizes the top ten stations you listen as you tune in

stations. They will be listed at the top of the channel list.

OPERATION

USING THE VISO TWO  AM/FM/DB/iPod

ENGLISH FRANÇAIS ESPAÑOL ITALIANO DEUTSCH NEDERLANDS SVENSKA РУССКИЙ

NAD VISO TWO Seite 24

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von NAD VISO TWO

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info