Bedienungsanleitung NAD VISO TWO (Seite 26 von 34) (Englisch)

602923

Zoom out

Zoom in

Vorherige Seite

1/34

Nächste Seite

ABOUT XM RADIO

The VISO TWO is “XM Ready” which means that with the addition of separately

sold XM Mini-Tuner CPC-9000 and XM Mini-Tuner Home Dock, it has everything

you need to listen to live XM. Everything else is built right in. Just subscribe to

the XM service and your VISO TWO will be ready to receive XM content.

NOTES

• Questions?Visitwww.xmradio.com

 ListenerscansubscribebyvisitingXMontheWebatwww.xmradio.com

orbycalling(atthetimeofprintingthismanual)XM’sListenerCareat

(800)8539696.BereadywithyourRadioIDthatcanbefoundonthe

radiobyselectingChannel0.

• CheckwithyourNADaudiospecialistforotherversionsofXMMini-

Tuner compatible with VISO TWO.

CONNECTING THE XM ANTENNA

Plug the end of the XM antenna into the corresponding XM antenna port

on the rear panel of the VISO TWO. Press and hold [DISPLAY] button on the

front panel to check the current XM channel’s signal strength as shown in

the VFD. Press and hold [DISPLAY] again to exit signal strength check.

NOTES

• ReferalsotoyourXMradio’sguideonhowtoinstalltheXMantennafor

optimumsignalreception.

• Thefrontpanel[TUNERMODE]and[MENU]buttonsfunctionthe

samewayatXMmode.The[MENU/TUNERMODE]keyofHTR6isthe

equivalentbuttonforbothfunctions.

• WhenusingtheseHTR6buttonstonavigateXMmenuoptions,ensure

thatthe“DEVICESELECTOR”settingofyourHTR6issetto“TUNER”.

• IfthereisnoXMtunerconnectedatthecorrespondingXMinput

terminalattherearpanel,theVFDwillshow“CHECKXMTUNER”.

TUNING STATIONS

There are three ways to tune to the XM channel you wish to listen. Make

sure to set your HTR 6’s “DEVICE SELECTOR” to “TUNER” prior to undertaking

the following tuning options.

1 ALL CH SEARCH (All Channel Search): Toggle front panel’s [MENU]

button to select “ALL CH SEARCH”. Use the front panel’s [TUNE ]

or HTR 6’s [ ] buttons to step up or down each available XM channel.

Press and hold [ ] for faster scanning of XM channels.

2 CATEGORY SEARCH: The XM channels are grouped into categories for

easier selection of desired genre.

a Toggle front panel’s [MENU] button to select “CATEGORY SEARCH”.

“CAT

” and a corresponding category is displayed in the VFD.

“CAT

” stands for categories the channels are grouped into – i.e.,

Country, Rock, Jazz & Blues, etc.

b Use HTR 6’s [ ] (or front panel’s [PRESET / ]) buttons to

step up or down the available categories.

c Press HTR 6’s [ ] (or front panel’s [TUNE / ]) buttons

to select through the available XM channels within the selected

category. Tuning will only be limited to within the selected category.

d Repeat “b” above to choose another category.

3 PRESET SEARCH: Toggle front panel’s [MENU] button to select “PRESET

SEARCH”. At this menu option, a stored preset can be directly recalled

by entering the preset number using the HTR 6’s numeric buttons.

DIRECT CHANNEL CALL

While at either “CATEGORY SEARCH” or “ALL CH SEARCH” mode, a desired

XM channel can be directly tuned in by using the HTR 6’s numeric buttons.

To key-in XM channels that are less the 3 digits, press “0” in place of the digit

or press [ENTER] after entering the XM channel number. For example, to

enter XM channel 8, press “0”, “0” and “8” or press “8” then [ENTER].

VIEW XM INFORMATION

Toggle [DISPLAY] button to display the XM information of the selected

channel such as the XM channel category, XM station name, artist name,

song title or any other text as supplied for the channel.

SETTING XM PRESETS

The procedure for storing XM channels is the same method as stated in the

section “SETTING RADIO PRESETS” under “LISTENING TO AM/FM RADIO”. You

can store up to 30 XM channels.

For immediate recall of stored XM presets, press the front panel’s [PRESET

/ ] button or HTR 6’s [PRESET ] keys to step up or down the

stored XM channel presets.

ABOUT THE iPod INPUT FEATURE

The VISO TWO is equipped with a data port in the rear panel where an

optional “NAD IPD 1 Dock with iPod” (NAD IPD 1) can be plugged in.

With the NAD IPD 1 linking the VISO TWO with your own iPod player, you

can enjoy listening to your favorite tracks and playlists, as well as view

applicable still image and video playback.

You can control your iPod player using the assigned buttons in the

VISO TWO front panel. And with the corresponding HTR 6 remote control

function keys, you can select the materials stored in your iPod for playback

as well as access many of its functions even from across the room. The

optional NAD IPD 1 also charges your iPod player while it is connected to

the VISO TWO.

NOTES

• NADIPD1andiPodplayerareoptionalandnotsuppliedwithyour

VISO TWO.

• NADIPDDockforiPod(NADIPD)currentlyhastwoversions–theNAD

IPD1andNADIPD2.ThesetwoNADIPDmodelsandlatervariantsare

compatible with the VISO TWO.

• iPodplayerfunctions,featuresandplaybackcapabilitiesaccessible

throughVISOTWOmayvarydependingonyouriPodplayermodel.

• WhenusingtheHTR6tocontroltheiPodfunctions,makesurethatthe

DeviceSelectorissetto“MPDOCK”.

CONNECTING THE OPTIONAL “NAD IPD 1 DOCK WITH

iPod” AND iPod PLAYER TO THE VISO TWO

Make sure that all the devices are unplugged before making the connections.

1 Connect the NAD IPD 1’s plug into the VISO TWO’s “MP DOCK” data port.

2 Connect also the NAD IPD 1’s S-video and audio out to the VISO TWO

VCR input (the default iPod source allocation in the VISO TWO).

3 Dock your iPod player into the NAD IPD 1.

4 After linking together your iPod player, NAD IPD 1 and the VISO TWO,

you can now plug them IN to their applicable power sources.

5 With your iPod player, NAD IPD 1 and VISO TWO all at power ON state,

rotate INPUT SELECTOR knob to select “iPod” source. The upper line of

the VFD will show “iPod”.

NOTE

 WhentheiPodplayerisremovedfromNADIPD1,thelowerlineofthe

VFDwillbrieyshow“Disconnected”.DockyouriPodplayerintothe

NADIPD1andthelowerlinewillbrieyshow“Connected”.

OPERATION

USING THE VISO TWO  AM/FM/DB/iPod

ENGLISH FRANÇAIS ESPAÑOL ITALIANO DEUTSCH NEDERLANDS SVENSKA РУССКИЙ

NAD VISO TWO Seite 26

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von NAD VISO TWO

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info