Bedienungsanleitung NAD VISO TWO (Seite 25 von 34) (Englisch)

602923

Zoom out

Zoom in

Vorherige Seite

1/34

Nächste Seite

DYNAMIC RANGE

The level of compression of stations can be set to eliminate the dierences in

dynamic range or sound level between radio stations. Popular music would

normally be more compressed than classical music, resulting in possible

dierent audio levels when changing from one station to the other. Setting the

Dynamic Range to “D-Range 0” means no compression, “D-Range 1/2” indicates

medium compression and “D-Range 1” shows maximum compression. No

compression is recommended, especially for classical music.

1 While listening to a DAB broadcast, press front panel’s [MENU] button

and then [TUNE / ] to select “Dynamic range”. Press [ENTER].

2 Toggle [TUNE / ] to select through “D-Range 0”, “D-Range

½”and “D-Range 1”. The upper line display shows the current dynamic

range setting while the lower line display will show the choices for the

dynamic range values.

3 Press [ENTER] to select desired Dynamic Range level.

TUNE AID

This option allows you to directly tune to a desired channel and include it in the

service list (if not yet available at the time). You can also use TUNE AID to assist

you in positioning the DAB antenna for best reception of the desired channel.

1 While listening to a DAB broadcast, press front panel’s [MENU] button

and then [TUNE / ] to select “Tune aid”. Press [ENTER]. The

current channel and frequency are shown in the lower line of the VFD.

The number of “o” displays at the upper line of the VFD indicates the

signal strength level of the current channel.

2 To select other channels, toggle [TUNE / ] to step through the

channel list. Release [TUNE / ] when you have arrived at your

desired channel. To improve the reception of the selected channel, adjust

or reposition the DAB antenna until the best reception is indicated.

3 Press [ENTER] to tune the selected channel.

NOTE

 Thenumberofensemblesandstationsthatcouldbescannedwillvary

dependingonyourlocation.

PRUNE LIST

There maybe situations wherein certain stations become inactive. The

“Prune List” option enables the deletion of these inactive stations in the

service list.

1 While listening to a DAB broadcast, press front panel’s [MENU] button

and then [TUNE / ] to select “Prune List”.

2 Press [ENTER]. Use [TUNE / ] and then press [ENTER] to select

between “Cancel” or “OK? [SELECT]”. Any inactive stations (normally

stations preceded by a “?” mark) are automatically deleted when “OK?

[SELECT]” is selected. Otherwise, select “Cancel”.

INFORMATION SETTINGS

While listening to a DAB broadcast, the type of information displayed in the

lower line of the VFD can be varied. Toggle front panel’s [DISPLAY] button

to step through the following display options:

Program Type

Station Name

Time and Date

Audio Signal information

Channel and frequency

Signal Q

Software version

PROGRAM TYPE

This is a description of the type of broadcast supplied by the station, such

as Pop, Rock, Drama and the likes.

STATION NAME

The name or identication of the DAB broadcast station is shown.

TIME AND DATE

The current time and date as supplied by the DAB station are displayed.

AUDIO SIGNAL INFORMATION

Displays the bit rate and audio type (stereo, mono or joint stereo)

as transmitted by the DAB broadcast provider. These are set by the

broadcaster to suit the type and quality of material being transmitted.

CHANNEL AND FREQUENCY

The channel and frequency of the currently tuned DAB broadcast are

displayed.

SIGNAL QUALITY

This displays the digital error rate (0 to 99) of the currently tuned channel

- the lower the gure, the better the quality of the received broadcast.

SOFTWARE VERSION

Show the version number of the installed software.

OPERATION

USING THE VISO TWO  AM/FM/DB/iPod

ENGLISHFRANÇAISESPAÑOLITALIANODEUTSCHNEDERLANDSSVENSKAРУССКИЙ

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

NAD VISO TWO Seite 25

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von NAD VISO TWO

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info