Bedienungsanleitung Naim HDX (Seite 8 von 30) (Englisch)

707495

Zoom out

Zoom in

Vorherige Seite

1/30

Nächste Seite

Installation - Getting Connected

3 Getting Connected

The HDX-SSD carries a variety of connection sockets on its rear panel. These are illustrated

and described in the following diagrams and paragraphs. The numeric legends on the

rear panel diagram refer to the numbered paragraphs in Section 3.2.

3.2 HDX-SSD Connections

3.2.1 Keyboard Socket

Optionally connect a PS2 format keyboard here to control

the HDX-SSD in combination with an external display.

3.2.2 Mouse Socket

Optionally connect a PS2 format mouse here to control the

HDX-SSD in combination with an external display.

3.2.3VGAInterface

Optionally connect a VGA format screen here to display

the HDX-SSD External Display Interface.

3.2.4 Serial Interface

For use if the HDX-SSD is to be integrated into an RS232

controlled environment.

3.2.5 USB Interface Sockets

USB control or audio source devices may be connected

here. USB source devices can be made available across a

network.

3.2.6 Network Socket

Connect to your network router here. The HDX-SSD requires

a working internet connection.

3.2.7S-videoandCompositeVideoSockets

Connect an S-video or composite video screen (television)

here for display of the HDX-SSD External Display Interface.

3.2.8 IR Input Socket

Optionally connect an RC5 control signal here for local

control of the HDX-SSD from an IR control repeater.

3.2.9 Coax and Optical Digital Audio Outputs

S/PDIF digital audio for connection to an audio system

digital input. These TosLink and BNC outputs duplicate the

analogue outputs.

3.2.10 Power Supply Upgrade

Enables the connection of an upgrade XPS or 555PS power

supply. The link plug fitted must be removed. See Diagram 3.3.

THE SXPS BURNDY CABLE ONLY MUST BE USED TO CONNECT

THE XPS OR 555PS POWER SUPPLIES.

Note: Both the HDX-SSD and upgrade power supply must

be switched off when the link plug is removed and cable

connections are made.

3.2.11 Output Selector

Selects output 1 (DIN), output 2 (phono) or both.

3.2.12 DIN Analogue Output (output 1)

Analogue output from the HDX-SSD for connection to a

local audio system. Use this option if connecting to a Naim

system.

3.2.13 Phono Analogue Output (output 2)

Analogue output from the HDX-SSD for connection to a

local audio system. Use the DIN option in preference to the

Phono option if connecting to a Naim system.

3.2.14 Signal Ground

Optionally disconnects and “floats” the analogue signal

ground from the chassis earth. Select chassis unless the

HDX-SSD is installed in a hi-fi system incorporating another

mains earthed source component or mains “hum” is

audible from the loudspeakers.

3.1 HDX-SSD Rear Panel

mains input

and fuse

power

switch

mouse

socket

3.2.4

3.2.1

keyboard

socket

3.2.3

VGA

display

interface

serial

interface

3.2.2

network

socket

3.2.6

USB

interface

sockets

3.2.5

S-video and

composite video

sockets

3.2.7

remote input

socket

3.2.8

coax and

optical digital

audio outputs

3.2.9

3.2.10

signal ground

3.2.11

phono analogue

audio output

(output 2)

3.2.13

power supply

upgrade socket

(link plug tted)

DIN

analogue

audio

output

(output 1)

output selection

3.2.14

3.2.12

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Naim HDX Seite 8

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Naim HDX

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info