Bedienungsanleitung Native Massive X (Seite 122 von 133) (Englisch)

707119

122

Zoom out

Zoom in

Vorherige Seite

1/133

Nächste Seite

(6) Velocity: Controls the influence of the incoming MIDI note’s velocity on the overall amplitude of

the envelope. When turned fully left, the envelope amplitude is not influenced by the velocity of the

incoming notes. When the fader is turned fully right, the overall envelope amplitude is directly pro-

portional to the velocity of the incoming notes. The Velocity button changes the slope of the Ve-

locity control from linear to logarithmic, when activated.

(7) Env Level: Defines the overall level of the envelope.

(8) Polarity: Selects one of three settings (Bi, Uni. Window) that determine the direction of modu-

lation.

• When Bi is selected, the modulation is bidirectional.

• With Uni selected, the modulation is unidirectional and moves only in one direction.

• When Window is selected, the envelope is unidirectional and mirrored at the center. This re-

moves the independent controls for attack and release, and offers only one shape control as

the stages are now identical.

(9) Display: Provides a visual representation of the envelope shape, based on how the knobs and

menus are set. Move the controls described above to see how each parameter influences the

shape of the envelope.

19.5. Switcher LFO

The Switcher LFO offers a suite of LFO types, optimized for different use cases. The LFO is made

up of the Rate, Shape, and Amp sections, running from left to right. The Rate section determines

the speed and the play mode of the LFO. Depending on the mode selected, the Rate knob will

change its appearance and functionality. Osc mode, provides an extremely fast modulation option

that can be used in sync with the pitch of the Wavetable oscillators. The Shape section offers 16

different waveform shapes, from the typical Sine, Triangle, Saw and Square, to Ramp, Random,

Spike and more.

Assigning a modulation source to the Shape selector allows you to scan through the different LFO

shapes, creating some dramatic sonic effects. The Fall/Rise control in the Amp section can be

used to determine the fade in and fade out of the LFO. The envelope is not velocity sensitive, and

always restarts each time a MIDI gate is received. This can be particularly useful in musical appli-

cations, for example, when using the LFO for pitch vibrato, it enables you to fade in the vibrato

slowly. The flexible shapes allow you to customise your LFO to tailor very specific modulation

tasks.

The Play modes determine whether the LFO loops continuously or plays through one cycle only,

and how the LFO cycle resets in response to incoming MIDI triggers. In addition to standard Gate

and Restart behavior, Loop REL mode can be used to create interesting release effects.

The Switcher LFO contains the following parameters and controls:

Modulators

118 Manual

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Native Massive X Seite 122

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info