Bedienungsanleitung Nec wt 600 (Seite 40 von 71) (Englisch)

214297

Zoom out

Zoom in

Vorherige Seite

1/71

Nächste Seite

6-7

Entry List

Displays the list of the entry signals. Use the SELECT ̆̄ but-

tons on your remote control or the projector cabinet to select the

signal and press the ENTER button on the remote control or the

projector cabinet to display the Entry Edit Command screen.

Using the Entry List

Making any adjustments to the current picture will automatically

can be loaded any time from the Entry List.

NOTE: Up to 100 presets can be registered.

Entry Edit Command

You can edit signals on the Entry List.

Load ............ Enables you to select a signal from the list.

Store ............ Enables you to store the currently projected sig-

nal.

Cut ............... Enables you to remove a selected signal from

the list and place it on the "clipboard" in the pro-

jector.

Copy ............ Enables you to copy a selected signal from the

list and place it on the "clipboard" in the projec-

tor.

Paste ........... Enables you to paste the signal placed on the

"clipboard" to any other line of the list. To do

this, select "Paste" and then select the line num-

ber you want to paste to. Last press ENTER.

Edit .............. Enables you to change source names or add

source names to "More" in the Sorce Select.

Source Name .. Enter a signal name. Up to 18 alpha-

numeric characters can be used.

Input Terminal ..

Change the input terminal. RGB is

available for RGB and DVI (ANALOG/

DIGITAL) signal; Video and S-Video

are available for composite signal.

Source List ...... Set signal selection method.

Lock ................ Set so that the selected signal cannot

be deleted when "All Delete" is ex-

ecuted.

Skip ................. Set so that the selected signal will be

skipped during auto search.

When complete, select OK and press ENTER.

To exit without storing setting, select Cancel.

Select "Source Name" and press ENTER to dis-

play the Source Name Edit window. You can

change source name on this window. Press [̄]

to display the software keyboard, which you can

enter alphanumeric characters. See page 10-5

for the key function of the software keyboard.

All Delete .....This feature enables you to delete all the regis-

tered signals in the Entry List.

The following buttons are not available for the currently pro-

jecting signals:

1) The Cut and Paste buttons on the Entry Edit Command

screen

2) The Input Terminal button on the Entry Edit screen

Picture (not available for Viewer and LAN)

Adjusting Brightness, Contrast, Color, Hue, and Sharpness

Brightness ....... Adjusts the brightness level or the back raster

intensity.

Contrast .......... Adjusts the intensity of the image according to

the incoming signal.

Color ............... Increases or decreases the color saturation level

(not valid for RGB).

Hue ................. Varies the color level from +/- green to +/-blue.

The red level is used as reference. This adjust-

ment is only valid for Video and Component in-

puts (not valid for RGB).

Sharpness ....... Controls the detail of the image for Video (Not

valid for RGB).

Volume

Adjusts the sound level of the projector speaker and AUDIO OUT

(mini jack).

6. Using On-Screen Menu

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Nec wt 600 Seite 40

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info