Bedienungsanleitung Nec wt 600 (Seite 41 von 71) (Englisch)

214297

Zoom out

Zoom in

Vorherige Seite

1/71

Nächste Seite

6-8

Screen

Type

4:3 Screen

16:9 Screen

Input

Signal

4:3

4:3 Window

4:3 Fill

Letterbox Squeeze

Wide Screen

Letterbox

Crop

Letterbox

Image Options

Selecting Aspect Ratio (not available for Viewer and LAN)

Aspect Ratio allows you to select the best Aspect mode to dis-

play your source image.

When screen size 4:3 is selected for the source, the following

selections will display:

4:3 ............... Standard 4:3 aspect

Letter Box .... Reduced to display the true aspect with black

borders on top and bottom

Wide Screen

.. Left & Right stretched with black borders on top

and bottom

Crop ............Left & Right stretched.

Left & Right sides cut. Available for 4:3 only.

When screen size 16:9 is selected for the source, the follow-

ing selections will display:

4:3 Window .. Reduced to display the true aspect with black

borders on right and left

Letter Box .... Standard 16:9 aspect

Wide Screen Left and right stretched to display the true as-

pect

4:3 Fill .......... Stretched to display in 16:9 aspect ratio

NOTE: You can adjust image positions vertically for source with black

borders. See page 6-18 “Selecting Aspect Ratio and Position for

Screen” for setting image positions.

Please note that using this projector for the purpose of commercial

gain or the attraction of public attention in a venue such as a coffee

shop or hotel and employing compression or expansion of the screen

image with a "Aspect Ratio" or "Screen" setting may raise concern

about the infringement of copyrights which are protected by copy-

right law.

NOTE: During 3D Reform adjustment, "Aspect Ratio" may not be avail-

able.

Should this happen, first reset the 3D Reform data and then do set-

ting again. Second repeat the 3D Reform adjustment.

Changing the aspect ratio can limit 3D Reform in its adjustable range.

Masking Unwanted Area (Blanking)

This feature allows you to mask any unwanted area of the screen

image.

Adjust the Top, Bottom, Left or Right blanking with the SELECT

̇ or ̈ button.

Adjusting Position and Clock

This allows you to manually adjust the image horizontally and

vertically, and adjust Clock and Phase.

Horizontal/Vertical Position:

Adjusts the image location horizontally and vertically using the

SELECT ̇ and ̈ buttons. This adjustment is made automati-

cally when the Auto Adjust is turned on. See "Auto Adjust" on

page 6-16 for turning on or off the Auto Adjust feature.

Clock ........... Use this item to fine tune the computer image

or to remove any vertical banding that might

appear. This function adjusts the clock frequen-

cies that eliminate the horizontal banding in the

image.

Press the SELECT ̇ and ̈ buttons until the

banding disappears. This adjustment may be

necessary when you connect your computer for

the first time. This adjustment is made automati-

cally when the Auto Adjust is turned on.

Phase ..........Use this item to adjust the clock phase or to

reduce video noise, dot interference or cross talk.

(This is evident when part of your image ap-

pears to be shimmering.) Use the SELECT ̇

and ̈ buttons to adjust the image.

Use "Phase" only after the "Clock" is complete.

This adjustment is made automatically when the

Auto Adjust is turned on.

Selecting Resolution

This allows you to activate or deactivate the Advanced AccuBlend

feature.

Auto ............. Turns on the Advanced AccuBlend feature. The

projector automatically reduces or enlarges the

current image to fit the full screen.

Native ..........Turns off the Advanced AccuBlend feature. The

projector displays the current image in its true

resolution.

See "Auto Adjust" on page 6-16 for turning on

or off the Auto Adjust feature.

NOTE:

* When "Resolution" is set to "Native", "3D Reform", "Aspect Ratio",

"Screen" and "Overscan" are not available.

* While you are displaying an image with higher resolution than the

projector's native resolution, “Resolution” is not available.

Selecting Overscan Percentage

Select overscan percentage (0%, 5%, 10% and 25%) for signal.

NOTE: When "Resolution" is set to "Native", this feature is not avail-

able, and the stored settings and adjustments are invalid.

NOTE: When "4:3 Fill" or "Crop" is selected in "Aspect Ratio", this fea-

ture is not available.

6. Using On-Screen Menu

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Nec wt 600 Seite 41

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info