Bedienungsanleitung Neff C44R20N3 (Seite 15 von 24) (Englisch)

495367

Zoom out

Zoom in

Vorherige Seite

1/24

Nächste Seite

2nd rinse

After a short time, the

Ì symbol appears again. x ‹:„‹ min

appears in the display.

1. Thoroughly rinse out the cleaning sponge.

2. Remove the remaining water from the evaporator dish using

the cleaning sponge.

3. Close the appliance door and press the … button.

The appliance starts rinsing.

Once descaling is complete,

‹‹:‹‹ and Ì appear in the

display.

4. Press the ~ main switch to finish descaling and switch off

the appliance.

Removing the remaining water

Remove the remaining water from the evaporator dish using the

cleaning sponge. Wipe out the cooking compartment using the

cleaning sponge and then dry with a soft cloth.

Cancelling the descaling

Note: After cancelling the descaling, you must rinse the

appliance twice. Other applications are disabled until the

second rinsing operation is complete.

Press and hold the

… button to cancel the descaling process.

To ensure that no descaling solution remains in the appliance,

it must be rinsed twice after a cancellation.

The

Î symbol appears.

Now proceed as described in the "1st rinse" section.

Troubleshooting

Malfunctions often have simple explanations. Please read the

following instructions before calling the after-sales service.

Repairs may only be carried out by fully trained after-sales

service technicians. Incorrect repairs to your appliance may

present considerable risks for the user.

: Risk of electric shock!

■ Work on the appliance electronics may only be performed by

a specialist.

■ Always disconnect the appliance from the power supply

when work is carried out on the electronics. Switch off the

circuit breaker or remove the fuse from your household fuse

box.

Problem Possible cause Notes/remedy

The appliance does not work The plug is not plugged in. Connect the appliance to the electricity

supply

Power cut Check whether other kitchen appliances

are working

Fuse defective Check in the fuse box to make sure that

the fuse for the appliance is OK

Faulty operation Switch the appliance off using the fuse in

the fuse box. Wait approximately

10 seconds and then switch it back on

The appliance cannot be started The appliance door is not fully closed Close the appliance door.

Appliance does not start.

x and ‚:‹‹

min appear in the display

Descaling has been cancelled Rinse the appliance twice

(see section: Cancelling descaling)

‹‹:‹‹ lights up in the display

Power cut Reset the time of day (see section: Setting

the clock)

The appliance is not in operation.

appears in the display, and a cooking time

The … button was not pressed after set-

ting

Press the … button to start, or press the

~ main switch to turn off the appliance

The appliance is not in operation. The time

of day is not shown in the display.

The clock display is switched off Switch on the clock display (see section:

Changing the time of day; switching the

clock display on and off)

The

Î (Fill water tank) indicator appears,

even though the water tank is full

The water tank has not been inserted

properly

Slide in the water tank until it engages.

The detection system is not working Descale the appliance (see section: Des-

caling) and check which water hardness

has been set (see section: Setting the

water hardness range)

It is difficult to engage the water tank Rubber seal on the water tank valve Lightly grease the rubber seal with lubri-

cant (order no. 311 168)

The evaporator dish has boiled empty

even though the water tank is full.

The water tank has not been inserted

properly

Slide in the water tank until it engages

The feed line is blocked Descale the appliance (see section: Des-

caling).

Check whether the water hardness range

is set correctly

The evaporator dish is overflowing The evaporator dish was not emptied after

the last cooking operation

Use the enclosed cleaning sponge to

empty the evaporator dish after every

cooking operation

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Neff C44R20N3 Seite 15

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Neff C44R20N3

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info