Bedienungsanleitung Netgear R7800 - Nighthawk X4S (Seite 165 von 173) (Englisch)

670487

165

Zoom out

Zoom in

Vorherige Seite

1/173

Nächste Seite

Internet or Ethernet Port LEDs Are Off

If either the Ethernet port LEDs or the Internet LED does not light when the Ethernet connection is made,

check the following:

• Make sure that the Ethernet cable connections are secure at the router and at the modem or computer.

• Make sure that power is turned on to the connected modem or computer.

• Be sure that you are using the correct cable.

When you connect the router’s Internet port to a modem, use the cable that was supplied with the modem.

This cable can be a standard straight-through Ethernet cable or an Ethernet crossover cable.

WiFi LED Is Off

If the WiFi LED stays off, check to see if someone pressed the WiFi On/Off button on the router.This button

turns the WiFi radios in the router on and off.The WiFi LED is lit when the WiFi radios are turned on.

You Cannot Log In to the Router

If you are unable to log in to the router from a computer on your local network, check the following:

• If you are using an Ethernet-connected computer, check the Ethernet connection between the computer

and the router.

• Make sure that the IP address of your computer is on the same subnet as the router. If you are using

the recommended addressing scheme, your computer’s address is in the range of 192.168.1.2 to

192.168.1.254.

• If your computer’s IP address is shown as 169.254.x.x, recent versions of Windows and Mac OS generate

and assign an IP address if the computer cannot reach a DHCP server.These autogenerated addresses

are in the range of 169.254.x.x. If your IP address is in this range, check the connection from the computer

to the router, and reboot your computer.

• If your router’s IP address was changed and you do not know the current IP address, clear the router’s

configuration to factory defaults.This sets the router’s IP address to 192.168.1.1. For more information,

see Factory Settings on page 171.

• Make sure that Java, JavaScript, or ActiveX is enabled in your browser. If you are using Internet Explorer,

click the Refresh button to be sure that the Java applet is loaded.

• Try quitting the browser and launching it again.

• Make sure that you are using the correct login information. The user name is admin, and the default

password is password. Make sure that Caps Lock is off when you enter this information.

• If you are attempting to set up your NETGEAR router as a replacement for an ADSL gateway in your

network, the router cannot perform many gateway services. For example, the router cannot convert

ADSL or cable data into Ethernet networking information. NETGEAR does not support such a

configuration.

Troubleshooting

165

Nighthawk X4S AC2600 Smart WiFi Router

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Netgear R7800 - Nighthawk X4S Seite 165

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Netgear R7800 - Nighthawk X4S

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info