Bedienungsanleitung Netgear R7800 - Nighthawk X4S (Seite 167 von 173) (Englisch)

670487

167

Zoom out

Zoom in

Vorherige Seite

1/173

Nächste Seite

entered a DNS address during the router’s configuration, reboot your computer, and verify the DNS address.

You can configure your computer manually with DNS addresses, as explained in your operating system

documentation.

• The router might not be configured as the TCP/IP gateway on your computer.

If your computer obtains its information from the router by DHCP, reboot the computer and verify the gateway

address.

• You might be running login software that is no longer needed.

If your ISP provided a program to log you in to the Internet (such as WinPoET), you no longer need to run

that software after installing your router.You might need to go to Internet Explorer and select Tools >

Internet Options, click the Connections tab, and select Never dial a connection. Other browsers provide

similar options.

Troubleshoot Internet Browsing

If your router can obtain an IP address but your computer is unable to load any web pages from the Internet,

it might be for the following reasons:

• The traffic meter is enabled, and the limit was reached.

By configuring the traffic meter not to block Internet access when the traffic limit is reached, you can

resume Internet access. If your ISP sets a usage limit, they might charge you for the overage.

• Your computer might not recognize any DNS server addresses. A DNS server is a host on the Internet

that translates Internet names (such as www addresses) to numeric IP addresses.

Typically, your ISP provides the addresses of one or two DNS servers for your use. If you entered a

DNS address during the router’s configuration, restart your computer.

Alternatively, you can configure your computer manually with a DNS address, as explained in the

documentation for your computer.

• The router might not be configured as the default gateway on your computer.

Reboot the computer and verify that the router address (www.routerlogin.net) is listed by your computer

as the default gateway address.

• You might be running login software that is no longer needed. If your ISP provided a program to log you

in to the Internet (such as WinPoET), you no longer need to run that software after installing your router.

You might need to go to Internet Explorer and select Tools > Internet Options, click the Connections

tab, and select the Never dial a connection. Other browsers provide similar options.

Changes Are Not Saved

If the router does not save the changes that you make on the router web pages, do the following:

• When entering configuration settings, always click the Apply button before moving to another page or

tab, or your changes are lost.

• Click the Refresh or Reload button in the web browser. It is possible that the changes occurred, but

the old settings might be in the web browser’s cache.

Troubleshooting

167

Nighthawk X4S AC2600 Smart WiFi Router

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Netgear R7800 - Nighthawk X4S Seite 167

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Netgear R7800 - Nighthawk X4S

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info