Bedienungsanleitung Netgear WAC505 (Seite 140 von 149) (Englisch)

710463

140

Zoom out

Zoom in

Vorherige Seite

1/149

Nächste Seite

Alternatively, you can configure your computer manually with DNS addresses, as explained in your

operating system documentation.

• Your computer might not use the correct TCP/IP settings.

If your computer obtains its information by DHCP, reboot the computer and verify the address of the

switch or Internet modem to which the access point is connected.

For information about TCP/IP problems, see Troubleshoot Your Network Using the Ping Utility on page

141.

You Cannot Log In to the Access Point Over a LAN

Connection

If you are unable to log in to the access point from a computer on your local network and use the access

point’s local browser interface, check the following:

• If you are using an Ethernet-connected computer, check the Ethernet cable between the computer and

the access point.

• Make sure that the IP address of your computer is in the same subnet as the access point.

If you disabled the access point’s DHCP client and configured a fixed (static) IP address when you

connected the access point to network or Internet modem (see Disable the DHCP Client and Specify a

Fixed IP Address on page 88), change the IP address and subnet mask on your computer to so that

the IP addresses of your computer and the access point are in the same IP subnet.

• If your access point’s IP address was changed (for example, the DHCP server in your network issued

an IP address to the access point) and you do not know the current IP address, use an IP scanner

application to detect the IP address. If you still cannot find the IP address, reset the access point’s

configuration to factory defaults.This sets the access point’s IP address to 192.168.0.100. For more

information, see Use the Reset Button on page 110.

• Make sure that Java, JavaScript, or ActiveX is enabled in your browser. If you are using Internet Explorer,

click the Refresh button to be sure that the Java applet is loaded.

• Try quitting the browser and launching it again.

• Make sure that you are using the correct login information. The user name is admin and the password

is the one that you specified the first time that you logged in. Make sure that Caps Lock is off when you

enter this information.

Changes Are Not Saved

If you are logged in to the access point’s local browser interface and the access point does not save the

changes that you make on a page, do the following:

• When entering configuration settings, always click the Apply button before moving to another page or

tab or your changes are lost.

• Click the Refresh or Reload button in the web browser. It is possible that the changes occurred but

that the old settings remain in the web browser’s cache.

Diagnostics and Troubleshooting

140

Insight Managed Smart Cloud Wireless Access Point WAC505 User Manual

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Netgear WAC505 Seite 140

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info