Bedienungsanleitung NordicTrack T 13.5 - NETL12814.1 (Seite 23 von 40) (Englisch)

605367

Zoom out

Zoom in

Vorherige Seite

1/40

Nächste Seite

7. Turn on the fan if desired.

The fan features several speed settings and an

auto mode. When the auto mode is selected,

the speed of the fan will automatically increase

and decrease as the speed of the walking belt

increases and decreases.

Press the fan buttons

repeatedly to select a fan

speed or the auto mode, or

to turn off the fan.

8. When you are finished exercising, remove the

key from the console.

When you are finished using the treadmill, step

onto the foot rails, press the Stop button, and

adjust the incline of the treadmill to zero. The

incline must be at zero or you may damage the

treadmill when you fold it to the storage posi-

tion. Next, remove the key from the console and

put it in a secure place.

Then, press the power switch into the off position

and unplug the power cord. IMPORTANT: If you

do not do this, the treadmill’s electrical compo-

nents may wear prematurely.

HOW TO USE AN ONBOARD WORKOUT

1. Insert the key into the console.

See HOW TO TURN ON THE POWER on page 21.

2. Select an onboard workout.

To select an onboard workout, press the Calorie

button, the Incline button, the Intensity button, or

the Speed button repeatedly until the desired work-

out appears in the display.

When you select an onboard workout, the display

will show the duration of the workout and the name

of the workout. In addition, a profile of the speed

settings of the workout will appear in the matrix. If

you select a calorie workout, the approximate num-

ber of calories you will burn will appear in the name

of the workout.

3. Start the workout.

Press the Start button or the Speed increase button

to start the workout. A moment after you press the

button, the treadmill will automatically adjust to the

first speed and incline settings of the workout. Hold

the handrails and begin walking.

Each workout is divided into segments. One speed

setting and one incline setting are programmed for

each segment. Note: The same speed setting and/

or incline setting may be programmed for consecu-

tive segments.

During the

workout, the

profiles on the

speed and

incline tabs

will show your

progress. The

flashing seg-

ment of the profile represents the current segment

of the workout. The height of the flashing segment

indicates the speed or incline setting for the current

segment. At the end of each segment, a series of

tones will sound and the next segment of the profile

will begin to flash. If a different speed and/or incline

setting is programmed for the next segment, the

speed and/or incline setting will flash in the display

to alert you and the treadmill will automatically

adjust to the new speed and/or incline setting.

The workout will continue in this way until the last

segment of the profile flashes in the display and the

last segment ends. The walking belt will then slow

to a stop.

ETS079913

(24978)

Current Segment

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

NordicTrack T 13.5 - NETL12814.1 Seite 23

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von NordicTrack T 13.5 - NETL12814.1

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info