738321
10
Zoom out
Zoom in
Vorherige Seite
1/12
Nächste Seite
7
SOFTWARE MANAGEMENT
The console software includes management functions to help you make the most of your experience with the MTX,
including simple diagnostics to help with troubleshooting and Club (user) settings that may be customized to suit
your environment.
To access these functions, press and hold both the Time ( +) and Time ( ) keys for three seconds, or until you
hear a bell. The following functions are displayed in sequence in the LCD; use the ( + ) key to scroll through the
functions, starting at d00. Press Enter to show the details of a function, to make a change to a user setting, or to
run a diagnostic test. To exit a function and return to scrolling mode, press Pause Clear twice.
Available options may vary depending upon your software version.
Code
(displayed in the
recovery timer field)
Type Description
d00
Diagnostic
Firmware. The firmware version and model information. Firmware
version number is displayed in the workout time field. Model number
is displayed in the sprint interval time field.
d01
Diagnostic
LCD Display Test. Initiates a sequential illumination of all individual
segments of the LCD. Press Enter a second time to illuminate all
segments at the same time. Press Time ( + ) or ( ) to repeat the tests.
Press Pause Clear twice to step back to scrolling mode.
d02
Diagnostic
Keypad Test. Press Enter, then press each of the 10 keypad keys.
The number of the pressed button flashes in the recovery interval
time field, and the key counter increments in the interval counter.
When all 10 keys have been successfully tested, “PASS” appears in
the workout time field. The key numbers are:
1 Quick Start 6 MAX CiRCUIT
2 MAX 14 INTERVAL 7 Pause Clear
3 Interval 8 Time ( + )
4 Manual 9 Time ( – )
5 CROSS CiRCUIT 10 Enter
Press Pause Clear twice to step back to scrolling mode.
d03
Diagnostic
Heart Rate connectivity. The heart rate icon illuminates if a
wireless heart rate signal is detected. The ANT+ or Bluetooth
®
icon
illuminates if the heart rate signal is from one of these sources.
d04
Diagnostic
Bluetooth
®
/ANT+. The radio firmware version is displayed in the
workout time field. The radio ID is displayed (flashing) in the calories
field. (This ID is used for pairing.) Press Time ( + ) or ( ) to change the
ID to any value between 000 and 127. Press Enter to save the value,
then press Pause Clear twice to step back to scrolling mode.
d05
Diagnostic
Speed. Pedal the machine. Speed in displayed in the speed (RPM)
field.
d06
Diagnostic
Level. Move the resistance level all the way forward and back. Level
number is displayed in the Level field, ADC value in the RPM field.
d07
Diagnostic
Battery Power. Installed battery voltage and ADC values are
displayed in the Workout Time and RPM fields, respectively.
10

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Octane Fitness MTX Maxtrainer wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Octane Fitness MTX Maxtrainer

Octane Fitness MTX Maxtrainer Installationsanweisung - Englisch - 1 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info