Bedienungsanleitung Olivetti ECR 2100 Euro (Seite 21 von 64) (Englisch)

624806

Zoom out

Zoom in

Vorherige Seite

1/64

Nächste Seite

PrPr

ogramming the Eurogramming the Eur

ogramming the Eur

o as the Cash Rego as the Cash Reg

o as the Cash Reg

ister'sister's

ister's

Base CurrBase Curr

Base Curr

encenc

enc

By default the cash register is programmed to work with your

currency as the base currency. If you wish to perform sales transactions

in Euro, you need to reprogram the cash register's base currency.

Proceed as follows to do so:

1. Open the printer compartment and slide the control switch to the

PRG position.

2. Type [14] followed by [1] and then press the [RA/

] key.

3. Slide the control switch to either the R1 or R2 position and then

refit, close and lock the printer compartment cover.

Helpful Hints fHelpful Hints f

Helpful Hints f

or a Successful Staror a Successful Star

or a Successful Star

t-Upt-Up

t-Up

This cash register has up to 12 departments available. You may

assign the taxable status to any other department by repeating the tax

assignment procedure used for Department 1. For departments 7-12,

press the [Dept Shift] key before the applicable department key. For

example, to select Department 10 press [Dept Shift] followed by the

[Department 4/10] key.

It is not necessary to re-program the entire machine to make a single

program change or correction. If you wish to make a change, such as an

update on a VAT rate, be sure that you are in the program mode, then

re-do the program in question. A new program entry will automatically

override a previous entry.

Remember that you enter into the program mode by moving the

control switch to the PRG position.

Be sure to slide the control switch to the OFF position at the end of a

business day.

In order to ensure continuous battery back-up protection, it is

important that the batteries be changed at least once every year.

Cash RegCash Reg

Cash Reg

ister Prister Pr

ister Pr

ogrammingogramming

ogramming

This cash register can be programmed to tailor its features according

to your specific needs. This programming facility allows you to:

• Define three-digit secret codes for each of the 6 programmable

clerks

• Set the date and time

• Set percent discount (-%) rates

• Define decimal point positions

• Define up to four VAT rates

• Define a department tax status

• Define Price Look-Ups (PLUs) for individual items

• Set an exchange rate for the Euro

• Program the different system options available

• Define a calculator mode password

• Define a manager password for the PRG and Z modes.

Set some of or all of the above features, depending on your business

needs. These program settings will reside in the cash register's memory

until you change them or deactivate the battery back-up system.

Setting Cash RegSetting Cash Reg

Setting Cash Reg

ister Fister F

ister F

eaea

turtur

tur

eses

All cash register features are programmed by first switching the

cash register into the program (PRG) mode by using the control

switch located in the printer compartment.

This chapter provides simple step-by-step procedures on how to

program the cash register. An example is provided after each procedure.

It is suggested that you first run through all the examples to become

familiar with the cash register's programming facilities, then program

the cash register according to your own specific needs.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Olivetti ECR 2100 Euro Seite 21

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info