Bedienungsanleitung Olivetti ECR 2100 Euro (Seite 23 von 64) (Englisch)

624806

Zoom out

Zoom in

Vorherige Seite

1/64

Nächste Seite

DeactivDeactiv

Deactiv

ting the Clerting the Cler

ting the Cler

k Systemk System

k System

Proceed as follows if for any reason you wish to deactivate the Clerk

system, in other words if you no longer want to enter a clerk number

and related secret code to perform sales transactions.

1. Open the printer compartment and slide the control switch to the

PRG position.

2. Type [44444] followed by [0] and then press the

[Amt Tend/TOTAL] key.

3. Slide the control switch to your operating mode and then close the

printer compartment cover.

EnterEnter

Enter

ing a Clering a Cler

ing a Cler

k Number/Secrk Number/Secr

k Number/Secr

et Code Befet Code Bef

et Code Bef

oror

e Cashe Cash

e Cash

RegReg

Reg

ister Operaister Opera

ister Opera

tionstions

tions

Proceed as follows to enter a defined Clerk number and related secret

code before using the cash register in the REG operating mode.

1. Open the printer compartment and slide the control switch to the R1

or R2 position.

2. Type a Clerk number [1, 2, ... or 6].

3. Type the corresponding three-digit code.

4. Press the [Clerk] key.

The clerk number indicator light will display a line (_) to indicate the

clerk number that is in use (CL 1 ...CL 6) and that it is now possible to

carry out transactions. The clerk number is printed on the sales receipt

and on the management reports.

DaDa

te and te and

te and

TimeTime

Time

Set the date to print the current date at the top of each receipt, journal

record or management report. The date will print in the

day/month/year format unless otherwise programmed as explained in

the section entitled Programming System Options.

Set the time to print the current time at the bottom of the receipt. The

time prints in the hour:minutes format and by default assumes the 12-

hour format. You can display the time by pressing the [Qty/Time] key

when the cash register is in the R1 or R2 mode.

The date and time change automatically as long as the cash register is

plugged into the wall outlet or the battery back-up system remains

active.

Setting the DaSetting the Da

Setting the Da

tete

Proceed as follows to set the current date:

1. Slide the control switch to the PRG position.

2. Type the [numeric keys] representing the current date. Remember

to use the DDMMYY format. Single digit numbers for months and

days must be preceded by a zero (0).

3. Press the [#/NS] key to store the date.

4. Program another feature or exit program mode by sliding the control

switch to the OFF position.

Example: Set a date of October 3, 1998.

Type/Press:

[031098] + [#/NS]

NOTE: If you wish that the date just entered be printed in the month/

day/year format, type [70] and then press the [RA/

] key.

More information on how to change the cash register's basic

programming is explained in the section Programming System

Options.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Olivetti ECR 2100 Euro Seite 23

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info