Bedienungsanleitung Olivetti ECR 6920F (Seite 18 von 59) (Englisch)

452056

Zoom out

Zoom in

Vorherige Seite

1/59

Nächste Seite

4. Enter the letters or characters of the string you wish to

define and then press . You are now prompted to

personalize the next line.

5. Repeat steps 3 and 4 if you wish to program the

remaining programmable header or footer lines.

6. Press

to exit.

Example: Change the third line of the default header to

SALES ON NOW using the CAPS Character Table.

Type/Press:

PLU Page Programming

Your cash register comes with 126 PLUs organized into the

following 3 levels (or pages): PLUs 1 to 42 on PLU Page 1,

PLUs 201 to 242 on PLU Page 2 and PLUs 301 to 342 on PLU

Page 3. You can redefine the PLU page contents by assign-

ing the range of 42 PLUs wanted to each page or level.

1. Control lock key position: PRG

2. Type the first PLU number [1 to 1500] of the range of

42 PLUs that you wish to assign and press the

corresponding PLU Page key

, or .

3. If the newly assigned PLUs are not programmed with

a price, proceed to do so as explained in section

"Programming Fixed Price Look-Ups (PLUs)".

Example: Assign PLU range 51 to 92 to

Type/Press:

Discount (-%) or Add-on (+%) Percents

The and keys can be set up to apply a predefined

percentage discount or percentage add-on. The rate can be

applied to an individual item or to the sales transaction total.

You can also specify a limit for the add-on or discount

percentage, so that add-ons or discounts above the limit

percentage will be disabled.

The procedure for both keys is the same:

1. Control lock key position: PRG.

PLU page or level

Range start PLU

2. Type the [numbers] representing the desired

percentage rate. Up to four digits ranging from 0 to

99.99 can be specified. Two digits must be placed

before the decimal point and two must be placed after.

3. Define whether the percentage rate is a discount or an

add-on by entering the related code indicated below:

0 = Percent add-on

1 = Percent discount

4. Enter the [4-digit] percentage rate limit. A value in the

range from 0 to 99.99 can be used. Two digits must be

placed before the decimal point and two must be placed

after. The default is 9999.

NOTE: When the rate limit is set to 0000, it is not possible

to override the predefined rate associated with the key.

5. Press

or to assign the rate and function to

the respective key.

Example: Program the

key with a standard 5.50%

add-on rate and the key with a standard 10%

discount rate, without limitation.

Type/Press:

Paid Out (PO) or Received on Account (RA)

Amounts

A High Digit Lock Out (HDLO) and receipt print status can be

assigned to the

and keys when these keys are

used for Paid out and Received on account transactions. By

assigning an HDLO status, you make sure that Paid out and

received on account amounts do not exceed a maximum

value. By programming the receipt print status, you decide

whether or not the receipt header is printed on PO and RA

receipts.

Units

Decimals

Percent

add-on code

Percent

discount code

Units

Decimals

No limitation

Switch to Recipt header

definition mode

Confirm entered

header

Exit

Receipt header

line selection

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Olivetti ECR 6920F Seite 18

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Olivetti ECR 6920F

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info