Bedienungsanleitung Olivetti ECR6900 (Seite 12 von 50) (Englisch)

40148

Zoom out

Zoom in

Vorherige Seite

1/50

Nächste Seite

Clearing an Error

Press to clear an error. The tone ends, the displays

clear and the keypad unlocks, allowing you to continue with

the transaction or restart the program.

If an error condition cannot be cleared by pressing

reset the cash register by performing one of the cash

Out-of-Paper

When the paper runs out, the message PAPER END ap-

pears on the operator display. Load the paper and press

to clear the error.

Cash Register Reset Operations

If the cash register does not function, for example while

programming and the error signal cannot be stopped by

pressing

, reset the cash register in OFF mode.

There are four reset operations; be very careful when choos-

ing the one to perform since you could unnecessarily

cancel report data and cash register programming data.

Partial Reset - <Reset D>

A Partial Reset operation just clears the cash register's

working memory.

1. Control lock key position: OFF.

2. Press and hold down

for 2 seconds and then press

If the cash register still remains in an error condition, proceed

with the Full Reset - Reports operation.

Full Reset Reports - <Reset C>

A Full Reset - Reports operation erases the cash register's

working memory, and all totals and counters (all report data).

1. Control lock key position: OFF.

2. Press and hold down

for 2 seconds and then press

If the cash register still remains in an error condition, proceed

with the Full Reset - New Language Entry Excluded operation.

Full Reset - New Language Entry Excluded -

A Full Reset - New Language Entry Excluded, erases the

cash register's working memory, all totals and counters

(all report data) and cancels all cash register program-

ming data with the exclusion of the language-specific

captions programmed. Be extremely careful when using

this reset operation.

1. Control lock key position: OFF.

2. Press and hold down

for 2 seconds and then press

3. Reprogram the cash register.

If the cash register still remains in an error condition, proceed

with the Full Reset - All Data operation.

Full Reset - All Data - <Reset A>

A Full Reset - All Data operation erases the cash regis-

ter's working memory, all totals and counters (all report

data) and cancels all cash register programming data.

Be extremely careful when using this reset operation.

Use this method as a last resort only.

1. Control lock key position: OFF.

2. Press and hold down

for 2 seconds and then press

3. Reprogram the cash register.

Electronic Journal

The cash register is equipped with an electronic journal

memory that by default can contain up to 13,000 lines of

transaction data. The electronic journal is not active when

you receive the cash register, but you can activate it at any

time as follows:

1. Control lock key position: PRG.

2. Press

Once the Electronic Journal is activated,you can personal-

ize some of its features by programming system options 4,

40, 41, 42 and 53. See "System Options" for details.

The Electronic Journal (EJ) stores all the sales receipts

recorded in the REG and MGR modes, thus allowing you to

print this record at any time or when memory reaches the

nearly full or full condition.

To know how many lines are remaining in the electronic

journal, in REG mode - outside of a sales transaction -

press

When the electronic journal reaches a nearly full condition,

there are less than 700 lines remaining in journal memory.

The operator display indicates the number of lines remaining

and a warning beep is emitted at the beginning and end of

each transaction performed (if programmed). Press

continue with your transaction and then print the contents of

the electronic journal as explained below, or otherwise

continue with other transactions.

When the journal reaches a full condition, less than 300

lines are remaining in memory. A message is displayed

indicating that the journal memory is full along with a warning

beep at the beginning of the transaction; press

continue with your transaction. You can then either print the

contents of the electronic journal as explained below, or

continue with further transactions; remember, however, that

further transaction data will NOT be stored in memory and

the consecutive receipt counter will not increase. If you want

to terminate the sales transaction, press

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Olivetti ECR6900 Seite 12

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Olivetti ECR6900

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info