Bedienungsanleitung Olivetti ECR6900 (Seite 11 von 50) (Englisch)

40148

Zoom out

Zoom in

Vorherige Seite

1/50

Nächste Seite

ENGLISH

23. - As the [%1] key, when appropriately programmed,

applies a preset percentage reduction or add on to the

price of an item or to the sales total. As the [RA] key,

registers any money received on account that is not part

of a sale; for example, the start-up money put in the

drawer at the start of each business day can be registered

as an RA.

24.

- (*) Opens the cash drawer without registering

any amount or when changing cash for a non-sales

transaction. With the cash register in PRG mode, used to

select the entity for caption programming. Press the key

repeatedly to scroll through the entities and select the

one to program.

25.

- As the [refund] key, subtracts an item that is

returned for refund; sales and activity totals are also

rectified. As the [(+/-)] key, subtracts or adds an amount

from/to an item or sales total.

The Control Lock

Insert the PRG, REG or Z key into the Control Lock to use

the cash register in the related mode. With reference to

figure 3, turn the control key to one of the following positions:

OFF The cash register is turned off and cannot be used.

PRG Used to program the cash register according to

your specific needs.

REG The cash register is set for standard sales transac-

tions. A customer receipt can be printed for each

transaction.

MGR Overrides clerk status programming thus allowing

the clerk to perform unauthorized operations (for

example, Voids, Refunds, Negative percent, Paying

money out, etc.).

X1/X2 Prints the X management (mid-day) report.

Z1/Z2 Prints the Z management (end-of-day) report and

resets totals (except the grand total) to zero.

The Control Keys

REG The REGISTER key can be used in the OFF, REG,

MGR and X lock positions, granting both Clerk and

Supervisor access to cash register functions.

PRG The PROGRAM key works in all modes (PRG,

OFF, REG, MGR, X and Z). It is usually used by

the Supervisor to program the cash register and

print X and Z management reports.

Z The Z key can be used in the OFF, REG, MGR, X

and Z modes granting a higher-level access with

respect to the REG key.

Operator and Customer Displays

Your cash register is equipped with a single-line customer

display and a dual-line operator display. With reference to

figure 6, the display is read from left to right as follows:

Department (1) - A set of digits indicating the

department key pressed for each

entry. At the end of a sales

transaction, indicates the means of

payment registered.

Repeat/Multiply (2) - A number displayed when

repeating or multiplying items to

indicate the number of items entered

at the same price.

Amount (3) - Indicates entry amounts and

sales totals.

1...15 (4) - With the Clerk System active,

indicates the clerk number entered

before working in the REG mode, or

whenever

is pressed.

Op. messages (5) - Upper line of the operator display

showing programming and transaction

messages, and clerk identifiers.

Special Symbol Indicators

Special symbols appear at the far left-hand side of the displays

during cash register operation:

C (Change) Indicates that the displayed amount is the

change due to the customer.

E (Error) Indicates when an error is made during

operation or when programming the cash

operator.

ST (Sub-total) Indicates that the amount shown is the subtotal

of a transaction, including sales tax if

applicable.

- (Minus) Displays a negative entry. Also displays if

subtotal or cash tendered total is a negative

number due to a return or refund.

_ (Line) Indicates, from left-to-right at the bottom of the

display: caps lock mode (during character

entries in the PRG mode), receipt off mode,

training mode and a transaction hold condition.

From right-to-left indicates: an electronic

journal nearly full condition (less than 700

transaction lines available), take-out tax.

Displayed when is pressed to indicate

that the amount is displayed in foreign

currency.

• Appearing on the far left, indicates a low

battery condition.

CA (Cash) Indicates a sales transaction paid by cash.

Ch (Check) Indicates a sales transaction paid by check.

Cr (Charge) Indicates a sales transaction paid by credit

card.

These symbols clear automatically when you start the next

entry or press

Barcode Reader

A barcode reader can be connected to the cash register via

the RS232 serial interface on the back of the register.

When programming PLUs, instead of manually entering the

PLU code you can scan the barcode on an article to insert it

automatically. You can then associate a price, status and

department to the PLU code as usual. See "Programming

Fixed Price Lookups".

Personal Computer Connectivity

The cash register can programmed from a computer con-

nected via its USB interface. For all programming features

see the online help provided with the software.

Error Conditions

Error Codes

The following error codes can be displayed:

E1 Operation error

E2 Sales amount exceeded or HDLO error

E3 Zero-price entry error

E4 Incorrect full-void entry

E5 Clerk number and password required

E6 Manager password required.

E8 Amount tender required.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Olivetti ECR6900 Seite 11

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Olivetti ECR6900

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info