Bedienungsanleitung Onkyo HT-R990 (Seite 42 von 172) (Englisch, Französisch)

462101

Zoom out

Zoom in

Vorherige Seite

1/172

Nächste Seite

Main Menu Input/Output Assign

Monitor Out

You can specify the output resolution for the HDMI OUT

and have the AV receiver upconvert the picture resolution

as necessary to match the resolution supported by your

TV.

■ Resolution

` Through:

Select this to pass video through the AV receiver at

the same resolution and with no conversion.

` Auto

Select this to have the AV receiver automatically

convert video at resolutions supported by your TV.

` 480p (480p/576p), 720p, 1080i, 1080p:

Select the desired output resolution.

` 1080p/24:

Select this for 1080p output at 24 frames per second.

` 4K Upscaling:

Select this for an output resolution four times that of

1080p, resulting in 3840 × 2160 pixels.

Note

• Depending on the incoming video signal, the video playback

may not be smooth or the vertical resolution may be lowered. In

this case select anything other than “1080p/24”.

HDMI Input

If you connect a video component to an HDMI input, you

must assign that input to an input selector. For example, if

you connect your Blu-ray Disc/DVD player to HDMI

IN 2, you must assign “HDMI2” to the “BD/DVD” input

selector.

If you’ve connected your TV to the AV receiver with an

HDMI cable, composite video and component video

sources can be upconverted

to HDMI. See “Video

Connection Formats” for more information on video

signal flow and upconversion (➔ page 79).

Here are the default assignments.

■ BD/DVD, VCR/DVR, CBL/SAT, GAME, AUX,

TV/CD, PORT

` HDMI1, HDMI2, HDMI3, HDMI4:

Select a corresponding HDMI input to which the

video component has been connected.

` -----:

Select this to output composite video and component

video sources from the HDMI OUT. The video

signal from the HDMI output is configured in

“Component Video Input” (➔ page 43).

Each HDMI input cannot be assigned to two input

selectors or more. When HDMI1 - HDMI4 have already

been assigned, you must first set any unused input

selectors to “-----” or you will be unable to assign

HDMI1 - HDMI4 to other input selectors.

Note

•When an HDMI IN is assigned to an input selector as explained

here, the same HDMI IN will be set as a priority in the “Digital

Audio Input” (➔ page 43). In this case, if you want to use the

coaxial or optical audio input, make the appropriate selection in

the “Audio Selector” setting (➔ page 52).

•The “TUNER” selector cannot be assigned and is fixed to the

“-----” option.

• Do not assign an HDMI IN to the TV/CD selector while “HDMI

Control(RIHD)” is set to “On” (➔ page 54), otherwise

appropriate CEC (Consumer Electronics Control) operation will

not be guaranteed.

• If you assign “-----” to an input selector that is currently

selected in “HDMI Through” (➔ page 55), the “HDMI

Through” setting will be automatically switched to “Off”.

• If you connect a component (such as UP-A1 Dock with docked

iPod/iPhone) to the UNIVERSAL PORT jack, you cannot

assign any input to the “PORT” selector.

Input/Output Assign

OUT

Composite video,

component video

Composite video,

component video

HDMI

Input selector Default assignment

BD/DVD HDMI1

VCR/DVR HDMI2

CBL/SAT HDMI3

GAME HDMI4

AUX -----

TV/CD -----

PORT -----

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Onkyo HT-R990 Seite 42

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Onkyo HT-R990

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info