Bedienungsanleitung Onkyo HT-R990 (Seite 44 von 172) (Englisch, Französisch)

462101

Zoom out

Zoom in

Vorherige Seite

1/172

Nächste Seite

Speaker Configuration

Note

• These settings are not available in either of the following cases:

– a pair of headphones is connected.

–the “Audio TV Out” setting is set to “On” (➔ page 55).

–“HDMI Control(RIHD)” is set to “On” (➔ page 54) and

you’re listening through your TV speakers.

■ Subwoofer, Center, Surround, Surround

Back

*1*2*3

` Yes

` No

■ Front High

*1*2*4

` Yes

` No

Note

If the “Surround” setting is set to “No”, this setting cannot be

selected.

If the “Powered Zone 2” setting is set to “Yes”, this setting

cannot be selected.

If the “Front High” setting is set to “Yes”, this setting is

automatically set to “No”.

If the “Surround Back” setting is set to “Yes”, this setting is

automatically set to “No”.

■ Surround Back Ch

` 1ch:

Select if only one surround back speaker L is

connected.

` 2ch

Select if two (left and right) surround back speakers

are connected.

Note

•If the “Surround Back” Setting is set to “No”, this setting

cannot be selected.

■ Wireless Front High, Wireless Surround Back,

Wireless Subwoofer

` Yes:

The audio is output from the speakers connected to

the wireless unit.

` No

The audio is not output from the speakers connected

to the wireless unit.

When the wireless unit is connected to the UNIVERSAL

PORT jack on the AV receiver, you can select if you wish

to output the audio from the speakers connected to the

wireless unit.

Note

•If the “Front High” setting is set to “No”, “Wireless Front

High” cannot be selected.

•If the “Surround Back” setting is set to “No”, “Wireless

Surround Back” cannot be selected.

•If the “Subwoofer” setting is set to “No”, “Wireless

Subwoofer” cannot be selected.

Speaker Distance

Here you can specify the distance from each speaker to the

listening position so that the sound from each speaker

arrives at the listener’s ears as the sound designer

intended.

■ Unit

` feet:

Distances can be set in feet. Range: 1.0ft to 30.0ft in

1 foot steps.

` meters:

Distances can be set in meters. Range: 0.30m to

9.00m in 0.3 meter steps.

(The default setting varies from country to country.)

■ Left, Front High Left, Center, Front High Right,

Right, Surround Right, Surround Back Right,

Surround Back Left, Surround Left, Subwoofer

` Specify the distance from each speaker to your

listening position.

Note

• These settings are not available in either of the following cases:

– a pair of headphones is connected.

–the “Audio TV Out” setting is set to “On” (➔ page 55).

–“HDMI Control(RIHD)” is set to “On” (➔ page 54) and

you’re listening through your TV speakers.

• Speakers that you set to “No” in the “Speaker Configuration”

cannot be selected.

Speaker configuration settings only need to be

changed if you are not using all of the speakers in this

package.

When an optional unit is connected to the

UNIVERSAL PORT jack on the AV receiver, the

speaker setting menu may appear on screen.

This setting is set automatically by Audyssey 2EQ

Room Correction and Speaker Setup (➔ page 30).

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Onkyo HT-R990 Seite 44

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Onkyo HT-R990

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info