Bedienungsanleitung Onkyo HT-R990 (Seite 49 von 172) (Englisch, Französisch)

462101

Zoom out

Zoom in

Vorherige Seite

1/172

Nächste Seite

■ Reference Level

Audyssey Dynamic EQ

Reference Level Offset

` 0dB

This should be used when listening to movies.

` 5dB:

Select this setting for content that has a very wide

dynamic range, such as classical music.

` 10dB:

Select this setting for jazz or other music that has a

wider dynamic range. This setting should also be

selected for TV content as that is usually mixed at

10 dB below film reference.

` 15dB:

Select this setting for pop/rock music or other

program material that is mixed at very high listening

levels and has a compressed dynamic range.

Movies are mixed in rooms calibrated for film

reference. To achieve the same reference level in a

home theater system each speaker level must be

adjusted so that –30 dBFS band-limited (500 Hz to

2000 Hz) pink noise produces 75 dB sound pressure

level at the listening position. A home theater system

automatically calibrated by Audyssey 2EQ

will play at

reference level when the master volume control is set to

the 0 dB position. At that level you can hear the mix as

the mixers heard it.

Audyssey Dynamic EQ is referenced to the standard

film mix level. It makes adjustments to maintain the

reference response and surround envelopment when the

volume is turned down from 0 dB. However, film

reference level is not always used in music or other non-

film content. Audyssey Dynamic EQ Reference Level

Offset provides three offsets from the film level

reference (5 dB, 10 dB, and 15 dB) that can be selected

when the mix level of the content is not within the

standard.

Note

•If “Dynamic EQ” setting is set to “Off”, these technologies

cannot be used.

■ Dynamic Volume

` Off

` Light:

Activates Light Compression Mode.

` Medium:

Activates Medium Compression Mode.

` Heavy:

Activates Heavy Compression Mode. This setting

affects volume the most. It quiets the loud parts,

such as explosions, and boosts the quiet parts so they

can be heard.

Note

• If you want to use Audyssey Dynamic EQ or Dynamic Volume

with THX listening modes, set the “Loudness Plus” setting to

“Off” and set “Preserve THX Settings” to “No” (➔ page 46).

• If you make Dynamic Volume active, “Dynamic EQ” is set to

“On”. The Dynamic Vol indicator will light.

• When “Dynamic EQ” is set to “Off”, “Dynamic Volume” is

automatically switched to “Off”.

• These technologies cannot be used when:

– a pair of headphones is connected, or

– Direct listening mode is selected.

About Audyssey Dynamic EQ

Audyssey Dynamic EQ solves the problem of

deteriorating sound quality as volume is decreased by

taking into account human perception and room

acoustics. Dynamic EQ selects the correct frequency

response and surround levels moment-by-moment at

any user-selected volume setting. The result is bass

response, tonal balance, and surround impression that

remain constant despite changes in volume. Dynamic

EQ combines information from incoming source levels

with actual output sound levels in the room, a

prerequisite for delivering a loudness correction

solution. Audyssey Dynamic EQ works well by itself.

However, if Audyssey 2EQ is on, the two technologies

work in tandem to provide well-balanced sound for

every listener at any volume level.

About Audyssey Dynamic Volume

Audyssey Dynamic Volume solves the problem of large

variations in volume level between television programs,

commercials, and between the soft and loud passages of

movies. Dynamic Volume looks at the preferred volume

setting by the user and then monitors how the volume of

program material is being perceived by listeners in real

time to decide whether an adjustment is needed.

Whenever necessary, Dynamic Volume makes the

necessary rapid or gradual adjustments to maintain the

desired playback volume level while optimizing the

dynamic range. Audyssey Dynamic Volume works fine

by itself, but can also be used with

Audyssey Dynamic EQ. When both are on,

Audyssey Dynamic EQ adjusts the perceived bass

response, tonal balance, surround impression, and

dialog clarity whether watching movies, flipping

between television channels, or changing from stereo to

surround sound content, when Dynamic Volume adjusts

the volume.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Onkyo HT-R990 Seite 49

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Onkyo HT-R990

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info