Bedienungsanleitung Onkyo HT-R990 (Seite 51 von 172) (Englisch, Französisch)

462101

Zoom out

Zoom in

Vorherige Seite

1/172

Nächste Seite

Picture Adjust

Using Picture Adjust, you can adjust the picture quality

and reduce any noise appearing on the screen.

To view the TV picture while setting, press ENTER. To

return to the previous screen, press RETURN.

■ Wide Mode

*1*2

This setting determines the aspect ratio.

` 4:3:

` Full:

` Zoom:

` Wide Zoom:

` Auto

According to the input signals and monitor output

setting, the AV receiver automatically selects the

“4:3”, “Full”, “Zoom” or “Wide Zoom” mode.

See “Monitor Out” for details on the monitor output

setting (➔ page 42).

■ Picture Mode

` Custom:

All settings can be performed manually.

` Cinema:

Select when the picture source is a movie or alike.

` Game:

Select when the video source is a game console.

` Through:

Does not adjust picture quality (changes resolution).

` Direct:

Does not adjust picture quality (does not change

resolution).

When video is output from HDMI OUT, it is

processed the same as “Through”.

With “Picture Mode”, you can change the following

settings to be suitable for the movie or game screen by one

operation: “Game Mode”, “Film Mode”, “Edge

Enhancement”, “Noise Reduction”, “Brightness”,

“Contrast”, “Hue”, “Saturation” or “Color

Temperature”.

■ Game Mode

*3*4*5

` Off

` On

If video signal delay occurs during playback on a video

component (i.e., game console), select the corresponding

input source and set the “Game Mode” setting to “On”.

The delay will decrease but in return the picture quality

will become poor.

■ Film Mode

*3*5*6

` Video:

“Film Mode” detection is not applied and the input

signal is handled as a video source.

` Auto

Detects whether the input signal is a video or a

movie. If it is a movie, the appropriate conversion is

applied.

The AV receiver will adjust to the picture source,

automatically converting it to the appropriate progressive

signal and reproducing the natural quality of the original

picture.

■ Edge Enhancement

*3*5*6*7

` Off

` Low

` Mid

` High

With Edge Enhancement, you can make the picture appear

sharper.

■ Noise Reduction

*3*5*6*7

` Off

` Low

` Mid

` High

With this setting, you can reduce noise appearing on the

screen. Select the desired level.

■ Brightness

*1*3*5

` –50 to 0 to +50

With this setting you can adjust the picture brightness.

“–50” is the darkest. “+50” is the brightest.

■ Contrast

*1*3*5

` –50 to 0 to +50

With this setting you can adjust contrast. “–50” is the

least. “+50” is the greatest.

■ Hue

*1*3*5

` –50 to 0 to +50

With this setting you can adjust the red/green balance.

“–50” is the strongest green. “+50” is the strongest red.

■ Saturation

*1*3*5

` –50 to 0 to +50

With this setting you can adjust saturation. “–50” is the

weakest color. “+50” is the strongest color.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Onkyo HT-R990 Seite 51

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Onkyo HT-R990

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info