Bedienungsanleitung Onkyo HT-R990 (Seite 50 von 172) (Englisch, Französisch)

462101

Zoom out

Zoom in

Vorherige Seite

1/172

Nächste Seite

IntelliVolume

■ IntelliVolume

` –12dB to 0dB

to +12dB in 1 dB steps.

With IntelliVolume, you can set the input level for each

input selector individually. This is useful if one of your

source components is louder or quieter than the others.

Use e/r to set the level.

If a component is noticeably louder than the others, use e

to reduce its input level. If it’s noticeably quieter, use r to

increase its input level.

A/V Sync

■ A/V Sync

` 0msec

to 800msec in 10 msec steps.

When using progressive scanning on your Blu-ray

Disc/DVD player, you may find that the picture and sound

are out of sync. With this setting, you can correct this by

delaying the audio signals.

To view the TV picture while setting the delay, press

ENTER.

To return to the previous screen, press RETURN.

The range of values you can adjust will depend on

whether your TV or display supports HDMI Lip Sync and

if the “Lip Sync” setting is set to “On” or not

(➔ page 55).

Note

• A/V Sync is disabled when the Direct listening mode is used

with an analog input source.

• This setting cannot be used with the NET input selector.

Name Edit

You can enter a custom name for each individual input

selector and radio preset for easy identification. When

entered, the custom name will appear on the display.

The custom name is edited using the character input

screen.

■ Name

To correct a character:

Tip

• To name a radio preset, use TUNER to select AM or FM, and

then select the preset (➔ page 28).

• To restore a custom name to its default, erase the custom name

by entering an empty white space for each letter.

Note

• This setting cannot be used for the NET and USB input selector.

Use q/w/e/r to select a character, and then

press ENTER.

Repeat this step to enter up to 10 characters.

To store a name when you’re done, be sure to

select “OK” by using q/w/e/r, and then press

ENTER.

Use q/w/e/r to select “ ”(Left) or

“ ”(Right), and then press ENTER.

Press ENTER several times to highlight the

incorrect character (For each pressure, the

cursor is moved on the next character).

Use q/w/e/r to select the correct character,

and then press ENTER.

BD/DVD

Shift All Erase

4 - 4. Name Edit

Name

abcdefghi j k lm

nopqrstuvwxyz

1234567890

–`

Space

Back Space

Shift

{}|: <>

ABCDEFGH I JKLM

NOPQRSTUVWXY Z

;

’,

[]

Back Space

#$%

()_ ~

+10 CLR

Space

Name input area

Space:

Enter a space character.

Shift

Toggles between lower and upper case characters.

(Left)/ (Right):

Moves the cursor left or right in the Name input

area.

Back Space

Moves the cursor backward and deletes one

character.

OK:

Confirms your entry.

Tip

This can also be performed by using +10 on the remote

controller.

Press CLR on the remote controller to delete all the

characters you have input.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Onkyo HT-R990 Seite 50

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Onkyo HT-R990

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info