Bedienungsanleitung Onkyo PR-SC5507 (Seite 149 von 156) (Englisch)

601414

149

Zoom out

Zoom in

Vorherige Seite

1/156

Nächste Seite

149

Troubleshooting—Continued

The front high, front wide and surround back

speakers produce no sound

• Depending on the current listening mode, no sound

may be produced by the front high, front wide, and

surround back speakers. Select another listening mode

(page 83).

• Not much sound may be produced by the front high,

front wide, and surround back speakers with some

sources.

• Make sure the speakers are configured correctly

(page 90).

The subwoofer produces no sound

• When you play source material that contains no infor-

mation in the LFE channel, the subwoofer may pro-

duce no sound.

• Make sure the speakers are configured correctly

(page 90).

There’s no sound with a certain signal format

• Check the digital audio output setting on the con-

nected device. On some game consoles, such as those

that support DVD, the default setting is off.

• With some DVD-Video discs, you need to select an

audio output format from a menu.

• Depending on the input signal, some listening modes

cannot be selected (pages 76 to 82).

Can’t get 6.2/7.2 playback

• If no front high, front wide and surround back speak-

ers are connected, or the Zone 2/3 speakers are being

used, 6.2/7.2 playback is not possible.

• You can not always select all of the listening modes,

depending on the number of the speakers connected

(pages 76 to 82).

The speaker volume cannot be set as required

(The volume cannot be set to +18.0 dB)

• Check to see if a maximum volume has been set

(page 105).

• If the volume level of each individual speaker has been

adjusted to high positive values (page 92), then the

maximum master volume possible may be reduced.

Note that the individual speaker volume levels are set

automatically after Audyssey MultEQ

XT Room

Correction and Speaker Setup has been completed

(page 57).

Noise can be heard

• Using cable ties to bundle audio cables with power

cords, speaker cables, and so on may degrade the

audio performance, so don’t do it.

• An audio cable may be picking up interference. Try

repositioning your cables.

The Late Night function doesn’t work

• Make sure the source material is Dolby Digital, Dolby

Digital Plus, and Dolby TrueHD (page 112).

The analog multichannel input doesn’t work

• Check the multichannel input connections (page 33).

• Make sure that the multichannel input is assigned to

the input selector (page 52).

• Make sure that the multichannel input is selected

(page 74).

• Check the audio output settings on your source com-

ponent.

About DTS signals

• When DTS program material ends and the DTS bit-

stream stops, the AV controller remains in DTS listen-

ing mode and the DTS indicator remains on. This is to

prevent noise when you use the pause, fast forward, or

fast reverse function on your player. If you switch your

player from DTS to PCM, because the AV controller

does not switch formats immediately, you may not

hear any sound, in which case you should stop your

player for about three seconds, and then resume play-

back.

• With some CD and LD players, you won’t be able to

playback DTS material properly even though your

player is connected to a digital input on the AV con-

troller. This is usually because the DTS bitstream has

been processed (e.g., output level, sampling rate, or

frequency response changed) and the AV controller

doesn’t recognize it as a genuine DTS signal. In such

cases, you may hear noise.

• When playing DTS program material, using the pause,

fast forward, or fast reverse function on your player

may produce a short audible noise. This is not a mal-

function.

The beginning of audio received by an HDMI IN

can’t be heard

• Since it takes longer to identify the format of an

HDMI signal than it does for other digital audio sig-

nals, audio output may not start immediately.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Onkyo PR-SC5507 Seite 149

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Onkyo PR-SC5507

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info