Bedienungsanleitung Onkyo PR-SC5507 (Seite 150 von 156) (Englisch)

601414

150

Zoom out

Zoom in

Vorherige Seite

1/156

Nächste Seite

150

Troubleshooting—Continued

There’s no picture

• Make sure that all video connecting plugs are pushed

in all the way (page 24).

• Make sure that each video component is properly con-

nected (pages 27 to 41).

• If your TV is connected to the HDMI output, set the

“Monitor Out” setting other than “Analog” (page 47),

and select “- - - - -” in the “HDMI Input Setup” on

page 49 to watch composite video, S-Video, and com-

ponent video sources.

• If your TV is connected to the COMPONENT VIDEO

MONITOR OUT, S MONITOR OUT, or V MONI-

TOR OUT, set the “Monitor Out” setting to “Analog”

(page 47), and select “- - - - -” in the “Component

Video Input Setup” on page 50 to watch composite

video and S-Video sources.

• If the video source is connected to a component video

input, you must assign that input to an input selector

(page 50), and your TV must be connected to either

the HDMI OUT or COMPONENT VIDEO MONI-

TOR OUT (pages 27 and 31).

• If the video source is connected to an HDMI input,

you must assign that input to an input selector

(page 49), and your TV must be connected to the

HDMI outputs (page 27).

• While the Pure Audio listening mode is selected, the

video circuitry is turned off and only video signals

input through HDMI IN can be output.

• On your TV, make sure that the video input to which

the AV controller is connected is selected.

• If you selected “Both (Main)” or “Both (Sub)” in the

“Monitor Out” setting, no picture may appear on your

TV that is connected to a secondary HDMI output (not

a priority HDMI output). In this case, change the set-

ting to “Both” (page 47).

There’s no picture from a source connected to

an HDMI IN

• Reliable operation with an HDMI-to-DVI adapter is

not guaranteed. In addition, video signals from a PC

are not guaranteed (page 27).

• When the “Monitor Out” setting is set to “Analog”,

and the “Resolution” setting is set to anything other

than “Through” (page 47), no video is output by the

HDMI outputs.

• When the “Resolution” (page 48) is set to any resolu-

tion not supported by the TV, no video is output by the

HDMI outputs.

• If the message “Resolution Error” appears on the AV

controller’s display, this indicates that your TV does

not support the current video resolution and you need

to select another resolution on your DVD player.

The onscreen menus don’t appear

• If your TV is connected to the analog outputs, set the

“Monitor Out” setting to “Analog” (page 47).

• (European and Asian models) Specify the TV sys-

tem used in your area in the “TV Format Setup” on

page 54.

• On your TV, make sure that the video input to which

the AV controller is connected is selected.

The picture is distorted

• (European and Asian models) Specify the TV sys-

tem used in your area in the “TV Format Setup” on

page 54.

The immediate display does not appear

• If you select other than “Analog” in the “Monitor Out”

setting (page 47), the immediate display will not

appear when the input signal from the COMPONENT

VIDEO IN is output to a device connected to the

COMPONENT VIDEO MONITOR OUT.

• Depending on the input signal, the immediate display

may not appear when the input signal from the HDMI

input is output to a device connected to the HDMI out-

put.

Reception is noisy, FM stereo reception is

noisy, or the FM STEREO indicator doesn’t

appear

• Relocate your antenna.

• Move the AV controller away from your TV or com-

puter.

• Listen to the station in mono (page 67).

• When listening to an AM station, operating the remote

controller may cause noise.

• Passing cars and airplanes can cause interference.

• Concrete walls weaken radio signals.

• If nothing improves the reception, install an outdoor

antenna.

The remote controller doesn’t work

• Make sure that the batteries are installed with the cor-

rect polarity (page 14).

• Install new batteries. Don’t mix different types of bat-

teries, or old and new batteries (page 14).

• Make sure that the remote controller is not too far

away from the AV controller, and that there’s no

obstruction between the remote controller and the AV

controller’s remote control sensor (page 14).

• Make sure that the AV controller is not subjected to

direct sunshine or inverter-type fluorescent lights.

Relocate if necessary.

• If the AV controller is installed in a rack or cabinet

with colored-glass doors, the remote controller may

not work reliably when the doors are closed.

Video

Tuner

Remote Controller

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Onkyo PR-SC5507 Seite 150

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Onkyo PR-SC5507

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info